Haven't tried it with car tires. But, the front ATV tires (12") went on a hell of a lot easier than the back ones (9") did. I'm guessing that car tires would damn near slip right on in comparison.

It is sturdy enough, and although I would redesign the hook/pry tool a bit, it did the job. If it isn't bolted down securely, it would be a pain in the ass to use.

There's a guy locally selling one of these on Craigslist that's implanted in a 280 pound slab of concrete. Bring a forklift, or your rugby team, I guess? He claims he's used it many times to replace his big-ass ten-ply diesel truck tires and it works super-duper good. Only $50!

I vote set the bead on with fire.

2 updates with the HF flux core.

The Lincoln wire was a pretty good improvement. It started to actually penetrate and showed signs of flux actually doing it's job.

Then I got a rectifier and giant capacitor and converted it to DC electrode negative. So for a total of $140 into it, it's actually pretty legit. The beads look just like MIG beads should! I'll have to throw down some beads that aren't just on an old rusty brake rotor and post some pics. For just under $200, the 220V flux core/mig comes with DCEN instead of AC, but I don't have access to 220V in the garage.

I'm interested in more details on your mods to the welder. I'm considering one of these.

Funny you should mention the 220 mig, as I've been toying with it for a few weeks now. I bought it to use exclusively with my 6500w predator generator.
I'll try to get around to reviewing both this week.
I would be interested in more details about the mods you made.

WIN: Propane Torch

We burned two 50 gallon drums tonight in preparation for smoker builds. Torch worked great, turned the barrels red and had no problems burning through some tough ass paint. I wouldn't want to use it for driveway weed destruction, the 6.5' hose is far too short and means your carrying a 20lb propane tank in one hand. $17 and change after 20% off and tax.

Before fire
Attachment 176222

With fire
Attachment 176223

Modifying the Harbor Freight 120v welder (if you already own one) - Fab Shop - Drive On Wood!

Here is a write up on this. Basically, find the 8 gauge wires that go to the ground clamp and to the torch handle. Cut these and wire them to the ~AC side of a bridge rectifier (I used a three phase 1600V 150amp but just used two of the phases). The positive side of the rectifier goes to the positive side of a capacitor (I used a 75V 68000mF cap) and then out to the ground plug (yes it's direct current electrode negative, so the ground clamp is high and the torch is low). The negative side of the rectifier goes to the negative side of the cap, then out to the torch. Most of these write ups say to replace the fan, but the newer style of welders come with a computer style fan, rather than the open fan it used to use.

A note about the cap, the bigger the better, but it has diminishing returns. I found a cheap cap on eBay that was larger than what is typically used, and it just barely fits inside the welder.

Here's a picture of what it can do. This was the first weld I tried without messing with wire feed. I just set it to the 6 setting. I'll have to dig up the video I found of someone actually figuring out how many IPM each setting is. The booger weld in the background is the old weld, unfortunately not back to back since that's on a solid brake rotor, but you get the idea.

Attachment 176226

Anyone try the 50ton shop press on here?
Thinking of buying one for the boys in the shop.
50 Ton Hydraulic Shop Press

Maybe my search skills are crap, but all the large uF capacitors I could find on eBay are priced exorbitantly. 50v 50,000uF - $60. That seems average. At that price, There's not much point in doing the project. I can get the bridge rectifier for $10, but capacitors are just too pricey to justify.

I have the 20 ton and I am very happy with it. I wouldn't expect the 50ton to be any worse.

New Mallory Screw 68 000uF 75 Volt Terminals Computer Grade Capacitor | eBay

This is the one I used, $35. I would agree that it's probably in best interest to find a cheap flux core on craigslist that is already better quality, But, if you have a HF flux core laying around, or get a really good deal on one and you like to tinker, this isn't a bad way to go. I am in $146.65 in this welder.

This seemed like the best place to post this, For those of you who are familiar with AvE, you may be interested to know he's endorsed this little bargain boroscope:


For those who aren't familiar with him, you are simply missing out. :giggle:


For all of $9.99 delivered, I went ahead and ordered one.

I have one of those boroscopes- it works well but its starting to fall apart. Still, at $10 I can just replace them as needed.

cheap caps:
Radial Capacitors

note the 15,000 uF for 3.99 each. connect in parallel.

Is yours air powered hydraulic? I think the 50ton is, but I can't see it described anywhere.

Not air powered, I have a pole like thing that you pump up and down just like a jack.

According to the reviews, it is air powered with a manual backup.

Air over hydraulic is tits. My greg smith equipment 20ton has that. Works great for wheel bearings. Only complaint is it leaks at the pressure gauge joint under extreme load.

I have been looking at the Forney 125 flux welder on Amazon as a possible alternative to the Harbor Freight unit, but one of the reviewers said he hooked his multimeter up to it and found that it was putting out AC as well, rather than DC electrode negative. I guess I'll get the HF unit and do the mods. I found these 63v 22000uF capacitors on eBay for $3.38, so I'll just run three of them in series with a bleed resistor.

Edit:

Just bought the stuff for the welder mod - $27 all in. With the $99 coupon for the welder, that puts it in pretty cheap territory.