How (and why) to Ramble on your goat sideways
*No longer quite so sure about running higher compression pistons.
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
So Joe, the air mattress idea has already failed. I think it's been less than 2 months, and already a leak. It leaks down from comfortably full to me laying on my box spring within 30 minutes. Time to go buy another and hope it lasts a little longer this time. Maybe another brand.
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
How dare I have the audacity to fully stop at a stop sign. Some douche in a silver Titan comes flying up on my *** as I'm doing a quick touch and go stop, and lays on the horn and throws his hands up at me. He comes up on me like if I hadn't been there he would have rolled through still doing 10-15mph. So I drive slow as **** for the last 1/4 mile before my turn off just to spite him. Turns out he makes the next turn and passes by my house, and apparently lives up the street, maybe 6 or 7 houses down. So if my car comes up damaged soon, I know who's windshield to smash out with a brick.
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
Meh, at this point it wouldn't really matter. My car is a horrible pile of ****. The paint is virtually rotting off the body, big dent in the rear driver quarter, the top is tattered and leaks, the brakes are past gone, transmission is the loudest I've ever heard, ball joints are really worn and slack, a/c and heater don't work right, everything squeaks and rattles, consistently loose belts that make all sorts of noise when they get wet. If the car caught on fire tomorrow I wouldn't be too upset. Once it got to a certain point of disrepair, I gave up.
Meh, at this point it wouldn't really matter. My car is a horrible pile of ****. The paint is virtually rotting off the body, big dent in the rear driver quarter, the top is tattered and leaks, the brakes are past gone, transmission is the loudest I've ever heard, ball joints are really worn and slack, a/c and heater don't work right, everything squeaks and rattles, consistently loose belts that make all sorts of noise when they get wet. If the car caught on fire tomorrow I wouldn't be too upset. Once it got to a certain point of disrepair, I gave up.
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
It's served me well. It's just gotten to the point that it's not worth keeping it up. Chassis is around 250k miles, a sloppy loose *****. To bring it back to reasonable good running order would cost probably double the book value, and I've already spent double that number on it in the 6 years I've owned it. So long as it will still run and roll and get me from point a to point b, I'm leaving it alone. As soon as I get something else, I'll put it out to pasture. That should come soon, I hope.
It's served me well. It's just gotten to the point that it's not worth keeping it up. Chassis is around 250k miles, a sloppy loose *****. To bring it back to reasonable good running order would cost probably double the book value, and I've already spent double that number on it in the 6 years I've owned it. So long as it will still run and roll and get me from point a to point b, I'm leaving it alone. As soon as I get something else, I'll put it out to pasture. That should come soon, I hope.
Auto Salvage Yards:Giggle: in Birmingham, Alabama with Reviews & Ratings - YP.com
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
My wife has been using Square for a long time without a problem.
Elite Member
iTrader: (21)
Join Date: Jun 2007
Location: Rochester, NY
Posts: 6,602
Total Cats: 1,264
Reuse what? Intake, head, piston, block? You want to be able to stone out most of the pit/dimple to remove sharp edges. Many (most?) would say none at all, but I've seen some pretty battered pistons get reused in a DD situation where it didn't appear to make a bit of difference.
my ******* supra sucked up and spat out something obviously metallic. The head and piston got lightly banged up but doesnt look really severe or deep. I have wiseco forged pistons in it, and my machinist says it looks reusable to him. The valve seats of the head are magically and luckily untouched. The turbo is untouched and nothing was at the cat...
im just really ******* pissed though so I just cant seem to think straight atm.
im just really ******* pissed though so I just cant seem to think straight atm.
no, I dont think so, just already has carbon filled in the shallow dents. Is it true that I could just order a replacement piston from wisco if I give them that number if I needed to?
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,508
Total Cats: 4,080
Two Decapitated Rooster Heads Found Near Prospect Park - Crown Heights - DNAinfo.com New York
looks like Joe ventured outside today...
looks like Joe ventured outside today...