Notices
Insert BS here A place to discuss anything you want

How (and why) to Ramble on your goat sideways

Old Jul 26, 2010 | 09:13 PM
  #1601  
WonTon's Avatar
Thread Starter
Elite Member
iTrader: (17)
 
Joined: Apr 2009
Posts: 2,799
Total Cats: 1
From: Atlanta, GA
Default

big ***** ride along in AD 1 would have been much better if her **** popped out
Old Jul 26, 2010 | 09:16 PM
  #1602  
TurboTim's Avatar
Elite Member
iTrader: (9)
 
Joined: Jun 2006
Posts: 7,035
Total Cats: 425
From: Chesterfield, NJ
Default

Originally Posted by Rocky64
hope this isnt a repost... dont be drinking and watching you will spit on your monitor....

subaru ride along
Ehh. I burped a little but that probably was from my dog jumping on my *****.
Old Jul 26, 2010 | 09:30 PM
  #1603  
TurboTim's Avatar
Elite Member
iTrader: (9)
 
Joined: Jun 2006
Posts: 7,035
Total Cats: 425
From: Chesterfield, NJ
Default

Originally Posted by lordrigamus
I can't believe it!!! Not even 10,000 miles and my ClutchMasters 4 puck ceramic clutch is slipping. How do you even slip a 4 puck clutch? Time for an ACT or Centerforce or something, I guess.
You press on the right pedal while also pressing on the left pedal half way. Once you slip those ceramics they glaze over for quite a while and won't hold crap. I had a centerforce get glazed (full boost launch in 3rd uphill by a girl in training) and it took a while to come back.
Old Jul 26, 2010 | 09:59 PM
  #1604  
lordrigamus's Avatar
Senior Member
iTrader: (14)
 
Joined: Aug 2008
Posts: 1,482
Total Cats: 0
From: Tinley Park, IL
Default

Well, I was happy and sad at the same time. It appears I don't need a clutch but I need a rear main seal. There is oil everywhere. This is weird considering I replaced it just for the hell of it when I changed my throw out bearing. I don't know if I put a nick in it or put it in crooked but it looks like it's leaking. The crank wasn't galled or anything like that. It barely had a witness mark where it was riding.

I don't think it was the input shaft seal, it was much cleaner than the back of my flywheel. I'm going to change them both anyway just to be safe.

The really bad thing is that damn ceramic disc wore one hell of a grove in the friction surface of my flywheel. A the very least it's going to need resurfacing. I'll have to dig up the paperwork or get in touch with Fidanza and find out what my minimum thickness is.

I just might get a less aggressive clutch disc while it's down too. It will be a little more streetable then and not so hard on the flywheel. Thanks for the clutch advice anyways guys. You never know, depending on the prices, it might just be worth changing some stuff out.
Old Jul 26, 2010 | 10:08 PM
  #1605  
turotufas's Avatar
Elite Member
iTrader: (7)
 
Joined: Jul 2009
Posts: 3,304
Total Cats: 7
From: Gainesville,Fl
Default

I think its time that I register for TS!
Old Jul 27, 2010 | 01:39 AM
  #1606  
rider384's Avatar
Want fries with that?
iTrader: (3)
 
Joined: Oct 2009
Posts: 2,011
Total Cats: 3
From: Twin Cities, Minnesota
Default

How to fix a broken 4850 fan:
Name:  videocardfix.jpg
Views: 138
Size:  43.5 KB
Old Jul 27, 2010 | 01:42 AM
  #1607  
Bryce's Avatar
Elite Member
iTrader: (24)
 
Joined: Jul 2007
Posts: 3,759
Total Cats: 35
From: Cypress, TX
Default

Originally Posted by rider384
How to fix a broken 4850 fan:
pic
Nice.


Should I buy another HD 4890 for some dual crossfire action for $130?
Old Jul 27, 2010 | 01:47 AM
  #1608  
rider384's Avatar
Want fries with that?
iTrader: (3)
 
Joined: Oct 2009
Posts: 2,011
Total Cats: 3
From: Twin Cities, Minnesota
Default

Originally Posted by Bryce
Nice.


Should I buy another HD 4890 for some dual crossfire action for $130?
No, they're good enough. My 4850 can run Crysis at 60fps.
Old Jul 27, 2010 | 01:51 AM
  #1609  
Bryce's Avatar
Elite Member
iTrader: (24)
 
Joined: Jul 2007
Posts: 3,759
Total Cats: 35
From: Cypress, TX
Default

Originally Posted by rider384
No, they're good enough. My 4850 can run Crysis at 60fps.
At 640x480. Lol.

I've got a 23er at 1920x1080, and sometimes have a twin next to it. There's no way a 4850 can do 60 fps with the graphics maxed out.
Old Jul 27, 2010 | 01:56 AM
  #1610  
rider384's Avatar
Want fries with that?
iTrader: (3)
 
Joined: Oct 2009
Posts: 2,011
Total Cats: 3
From: Twin Cities, Minnesota
Default

Originally Posted by Bryce
At 640x480. Lol.

I've got a 23er at 1920x1080, and sometimes have a twin next to it. There's no way a 4850 can do 60 fps with the graphics maxed out.
It was at 60 at 1024x760-some with max graphics. Around 45-50 at 1440x900 (My max specs). But this was before mine had a second monitor.

Gimme yer specs.
Old Jul 27, 2010 | 01:58 AM
  #1611  
Bryce's Avatar
Elite Member
iTrader: (24)
 
Joined: Jul 2007
Posts: 3,759
Total Cats: 35
From: Cypress, TX
Default

Originally Posted by rider384
It was at 60 at 1024x760-some with max graphics. Around 45-50 at 1440x900 (My max specs). But this was before mine had a second monitor.

Gimme yer specs.
Ok, makes more sense then.

Currently core i7 920. 2 Western digital black 640gb in raid 0. 16gb ram (ramdrive FTW). single Xfx HD4890.

Oh, and the 0 key just quit working on my numpad. :(
Old Jul 27, 2010 | 02:01 AM
  #1612  
rider384's Avatar
Want fries with that?
iTrader: (3)
 
Joined: Oct 2009
Posts: 2,011
Total Cats: 3
From: Twin Cities, Minnesota
Default

Originally Posted by Bryce
Ok, makes more sense then.

Currently core i7 920. 2 Western digital black 640gb in raid 0. 16gb ram (ramdrive FTW). single Xfx HD4890.

Oh, and the 0 key just quit working on my numpad. :(


I don't have that kind of muneez... C2D @ 3ghz and 4 gigs of ram...

Still, runs games MORE than well enough. I don't need better 'till games get even higher spec'd (Which assassin's creed II has done, I'm gonna have to up my proc to play it well)
Old Jul 27, 2010 | 02:09 AM
  #1613  
Bryce's Avatar
Elite Member
iTrader: (24)
 
Joined: Jul 2007
Posts: 3,759
Total Cats: 35
From: Cypress, TX
Default

I planned this build back during Thanksgiving, finally bought it 2 months ago. It's something that will last me for several years if I upgrade the video card when needed. I upgraded from a single core athlon XP. But I also have a core i7 laptop with a Gtx280m since thanksgiving.

You should get ARMA 2 and watch your computer DIE in front of you. I load the entire game into ram to have a virtual super duper SSD drive in order to play it smoothly, at medium graphics.

Check out my raided HDD's vs. my ramdrive. Lol!
Attached Thumbnails How (and why) to Ramble on your goat sideways-hdtune_benchmark_marvell_raid_vd_0.png   How (and why) to Ramble on your goat sideways-hdtune_benchmark_.png  
Old Jul 27, 2010 | 04:40 AM
  #1614  
NA6C-Guy's Avatar
Elite Member
iTrader: (1)
 
Joined: Feb 2008
Posts: 7,930
Total Cats: 44
From: Birmingham Alabama
Default

Originally Posted by Braineack
i was out sunday in this weather, it was 98°F with a "real feel" of 105°F. I lasted about 45 minute running wires to my engine bay, when i was finally ready to crank the car again I couldn't take it anymore. I took a cold shower and ended up sleeping until 6pm. **** completely drained my batteries, the brain needs a lithium upgrade.
That's the only thing I miss about working construction. Get home after a full 10-12 hour day in the heat and actually sleep. My sleep condition didn't exist then. Heat/sun will drain you for sure.
Old Jul 27, 2010 | 04:44 AM
  #1615  
NA6C-Guy's Avatar
Elite Member
iTrader: (1)
 
Joined: Feb 2008
Posts: 7,930
Total Cats: 44
From: Birmingham Alabama
Default

Originally Posted by Bryce
At 640x480. Lol.

I've got a 23er at 1920x1080, and sometimes have a twin next to it. There's no way a 4850 can do 60 fps with the graphics maxed out.
Certainly not. When I built my current computer with all top of the line parts about 1.5 years ago for Crysis, even my 4870 Toxic Edition overclocked I only see about an average of 25fps at 1920x1200 with maxed graphics
Old Jul 27, 2010 | 05:20 AM
  #1616  
NA6C-Guy's Avatar
Elite Member
iTrader: (1)
 
Joined: Feb 2008
Posts: 7,930
Total Cats: 44
From: Birmingham Alabama
Default

Has there ever been a sexier car made?

Name:  Lamborghini-Miura-01.jpg
Views: 139
Size:  169.6 KB
Old Jul 27, 2010 | 06:20 AM
  #1617  
b0ne's Avatar
Junior Member
 
Joined: Feb 2009
Posts: 119
Total Cats: 0
From: Oregon
Default

If you like that, you'll love this.

http://www.joesackey.com/galleryupload/albums/Batch%20Add%20Files/The%20Zinc%20Miura/


Drill up the path for more pic dirs.
Old Jul 27, 2010 | 07:32 AM
  #1618  
turotufas's Avatar
Elite Member
iTrader: (7)
 
Joined: Jul 2009
Posts: 3,304
Total Cats: 7
From: Gainesville,Fl
Default I win!



Name:  toyota2000gt1.jpg
Views: 140
Size:  25.4 KB
Old Jul 27, 2010 | 09:55 AM
  #1619  
redfred18t's Avatar
Junior Member
iTrader: (1)
 
Joined: Apr 2010
Posts: 434
Total Cats: 1
From: MA
Default

no no, I win

Old Jul 27, 2010 | 10:02 AM
  #1620  
levnubhin's Avatar
Elite Member
iTrader: (30)
 
Joined: Aug 2007
Posts: 7,329
Total Cats: 12
From: Va Beach
Default

WAT EVER
FLOAT YA BOAT
26'S BITCH GET IN


Name:  3cd7e46e.jpg
Views: 142
Size:  54.8 KB
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:41 PM.