me = happy
Thread Starter
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
My total costs for my 1.8 LSD rear conversion:
$50 1.8 assembly (hell of a deal! Thanks Brian)
$50 Driveshaft (shipped)
$170 RX7 Clutch-Type LSD (shipped)
$109 Halfshafts (94-95 w/ABS) (shipped)
est. $50-75 Seals/Clips/Fluid
------
$450
$450
minus $100-400 1.8 Open Meatball / 1.6 VLSD Assembly
--------
Next to nothing!
My total costs for my clutch swap:
$200 Dual friction keval/carbon clutch
$40 Flyhweel resurfacing
est. $30 Rear Seal
------
$270
$240
minus $150 JUN Flywheel (10lbs.)
$100-200 ACT HD KIT (8k)
--------
Next to nothing!
$50 1.8 assembly (hell of a deal! Thanks Brian)
$50 Driveshaft (shipped)
$170 RX7 Clutch-Type LSD (shipped)
$109 Halfshafts (94-95 w/ABS) (shipped)
est. $50-75 Seals/Clips/Fluid
------
$450
$450
minus $100-400 1.8 Open Meatball / 1.6 VLSD Assembly
--------
Next to nothing!
My total costs for my clutch swap:
$200 Dual friction keval/carbon clutch
$40 Flyhweel resurfacing
est. $30 Rear Seal
------
$270
$240
minus $150 JUN Flywheel (10lbs.)
$100-200 ACT HD KIT (8k)
--------
Next to nothing!
Thread Starter
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
1.6 ACT HD for a Competition Stage III, only 8k on it. holds 180rwtq.
I have all the cltuch parts, just waiting on a few rear parts and should be throwing it all togther early Feb.
I have all the cltuch parts, just waiting on a few rear parts and should be throwing it all togther early Feb.
Nice, sounds like mine. Got the full 1.8 setup shipped for 600. Then sold my vlsd and parts for 200.
Clutch is 1.8 ACT for 125 and 1.8 flywheel for 60ish. No discount for selling stuff on clutch though :(.
Deals rule.
Clutch is 1.8 ACT for 125 and 1.8 flywheel for 60ish. No discount for selling stuff on clutch though :(.
Deals rule.
Thread Starter
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
I spent two weeks trying to find an LSD; Started looking at ones for $800, then $400, then I found one for $250 and finally got this one for $150 plus $20 to ship.
If I were only planning on 180 ft*lbs I would stick with the stock clutch.
My low mile stock clutch spins in 3rd gear. It's worthless after 6psi. Last dyno was ~170rwtq
Joined: Jun 2005
Posts: 19,338
Total Cats: 574
From: Fake Virginia
Thread Starter
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Thread Starter
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Thread Starter
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
I'm snagging a salvage 99 car from auction/lot when I get back. Market is about $800 for one wrecked good-like. Then I'll have brakes, torsen, 1.8, a spare trans, and tons of other crap to sell. Its good to have a father in the salvage business.
sounds good! do you have it in yet? I got the diff in but i can't get the old !#%$ing halfshafts off.
here's mine:
RX7 LSD 160
2 1.8 diffs and driveshaft 180
diff bushings 65
bushing pressing 34 (
)
halfshafts 140
$579
VLSD -275
2nd 1.8 diff -150-250
Total: $100 or less.
here's mine:
RX7 LSD 160
2 1.8 diffs and driveshaft 180
diff bushings 65
bushing pressing 34 (
)halfshafts 140
$579
VLSD -275
2nd 1.8 diff -150-250
Total: $100 or less.
What kind of discount do your buddies at mt.net get? 
The conversation surrounding Brain's lsd made it sound as though there were more to go around, so I figured he'd share. I have mine. Picked it up on ebay for $115 delivered. Looks like it has never been used- all plates were at or exceeded spec. It will work nicely with the 4.10 rear I found in a dumpster.
I'll just need to get my free Turbo II trans sorted after that.

The conversation surrounding Brain's lsd made it sound as though there were more to go around, so I figured he'd share. I have mine. Picked it up on ebay for $115 delivered. Looks like it has never been used- all plates were at or exceeded spec. It will work nicely with the 4.10 rear I found in a dumpster.

I'll just need to get my free Turbo II trans sorted after that.
Damn swapping on cheap...
But I was just lazy and wanted it done quik so paid the price but whatever.. It'll all be yanked soon anyway for the r2 drivetrain..
Gonna be getting the trans adapters made here soon too...
Loved the clutch type so far.. Makes the diff one of the best mods I've done!!!!!
But I was just lazy and wanted it done quik so paid the price but whatever.. It'll all be yanked soon anyway for the r2 drivetrain..
Gonna be getting the trans adapters made here soon too...
Loved the clutch type so far.. Makes the diff one of the best mods I've done!!!!!
hey scott, I finally got a mbc
Ive been doing tuning runs up and down 460 during the last 3 hours and I'm proud to say that the ebay clutch is holding 15psi like a champion! I'm going to a dyno day on saturday in harrisonburg, va. I'll get some numbers for everyone then on the holding power of the ebay clutch. Also ill make a run with stock timing and a run with timing increases with WI.
Ive been doing tuning runs up and down 460 during the last 3 hours and I'm proud to say that the ebay clutch is holding 15psi like a champion! I'm going to a dyno day on saturday in harrisonburg, va. I'll get some numbers for everyone then on the holding power of the ebay clutch. Also ill make a run with stock timing and a run with timing increases with WI.
Thread Starter
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
sweet. I wish I got to drive it at 15psi!!!! ****...i still have that solenoid to mail you 
which clutch was that agian? the $180 or so F1 stage II or something?

which clutch was that agian? the $180 or so F1 stage II or something?








