NRG is a pathetic company. Yes, the wheel-hub company
#1
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
NRG is a pathetic company. Yes, the wheel-hub company
I've had problems with my 1-year old quick release. First the pin fell out so it will not release, nor can I dig-around in there and make it release so it looks like I'll be cutting it off the rod rather than unbolting it.
Here is the great part:
The screws that hold the wheel onto the QR hub all stripped and 3 of the remaining 5 bolts pulled out the threads while I was on track.
I called NRG just now and was really surprised to see how much they don't care. I explained to the guy that I was racing on the track, and the QR Hub essentially started coming apart and he kept saying "you only have 30-days of warranty". I finally asked him after realizing that I was getting nowhere, "Do you care at all that your hub fell apart? Do you have any desire to revisit this design so it doesn't fail again?" His response was a shocking "no".
So I bought another ebay hub from another dumb company until I can afford $400 for a proper Works-Bell hub. I was going to buy another NRG hub because I think the 2.5 design will be fine, but after that bullshit I'm not giving them another cent. I'd pay $400 for a WB hub rather than give them another $150.
Here is the great part:
The screws that hold the wheel onto the QR hub all stripped and 3 of the remaining 5 bolts pulled out the threads while I was on track.
I called NRG just now and was really surprised to see how much they don't care. I explained to the guy that I was racing on the track, and the QR Hub essentially started coming apart and he kept saying "you only have 30-days of warranty". I finally asked him after realizing that I was getting nowhere, "Do you care at all that your hub fell apart? Do you have any desire to revisit this design so it doesn't fail again?" His response was a shocking "no".
So I bought another ebay hub from another dumb company until I can afford $400 for a proper Works-Bell hub. I was going to buy another NRG hub because I think the 2.5 design will be fine, but after that bullshit I'm not giving them another cent. I'd pay $400 for a WB hub rather than give them another $150.
#3
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
I also asked him if he wanted to offer any kind of a discount to me for another NRG hub. He did not of course and when I told him that I was going to buy something else, he really didn't care. At some point he must realize that his options were:
This is why I could not make it as a businessman. My logic tells me that he should replace the product for free, because not only did he put the customer out with a bad product, but that it's the right thing to do. A steering wheel hub is not a wear item, and should last forever.
I guess this is the same reason my "made in Chinaland" Craftsman jack doesn't work right, why my $200 chinese Logitech remote doesn't always work, why my computers last <3-years, why my $2000 TV's last <2-years. It's also interesting to note some American made products that stand the test of time like my Absurdflow, Trackspeed, Megasquirt, AST, and 949 parts seem to work without failure.
- Replace Hustler's hub for free and keep a customer
- Give Hustledonger a discount so he can keep a customer and still make some money
- Do nothing, essentially disrespect a customer, never recieve another cent from that customer, and realize that Hustler is going to express NRG's malcontent for customer satisfaction.
This is why I could not make it as a businessman. My logic tells me that he should replace the product for free, because not only did he put the customer out with a bad product, but that it's the right thing to do. A steering wheel hub is not a wear item, and should last forever.
I guess this is the same reason my "made in Chinaland" Craftsman jack doesn't work right, why my $200 chinese Logitech remote doesn't always work, why my computers last <3-years, why my $2000 TV's last <2-years. It's also interesting to note some American made products that stand the test of time like my Absurdflow, Trackspeed, Megasquirt, AST, and 949 parts seem to work without failure.
#6
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
I love that when I called Advance Auto to ask if I could return an alternator core to a different store than where I was to purchase, they offered me an additional 16% discount off the coupon I was going to use for no reason.
If anything, I'd just work on getting the dude fired, just because.
#7
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
I also asked him if he wanted to offer any kind of a discount to me for another NRG hub. He did not of course and when I told him that I was going to buy something else, he really didn't care. At some point he must realize that his options were:
This is why I could not make it as a businessman. My logic tells me that he should replace the product for free, because not only did he put the customer out with a bad product, but that it's the right thing to do. A steering wheel hub is not a wear item, and should last forever.
I guess this is the same reason my "made in Chinaland" Craftsman jack doesn't work right, why my $200 chinese Logitech remote doesn't always work, why my computers last <3-years, why my $2000 TV's last <2-years. It's also interesting to note some American made products that stand the test of time like my Absurdflow, Trackspeed, Megasquirt, AST, and 949 parts seem to work without failure.
- Replace Hustler's hub for free and keep a customer
- Give Hustledonger a discount so he can keep a customer and still make some money
- Do nothing, essentially disrespect a customer, never recieve another cent from that customer, and realize that Hustler is going to express NRG's malcontent for customer satisfaction.
This is why I could not make it as a businessman. My logic tells me that he should replace the product for free, because not only did he put the customer out with a bad product, but that it's the right thing to do. A steering wheel hub is not a wear item, and should last forever.
I guess this is the same reason my "made in Chinaland" Craftsman jack doesn't work right, why my $200 chinese Logitech remote doesn't always work, why my computers last <3-years, why my $2000 TV's last <2-years. It's also interesting to note some American made products that stand the test of time like my Absurdflow, Trackspeed, Megasquirt, AST, and 949 parts seem to work without failure.
#8
I've had my NRG for over 2 years now. No problems expect the safety button broke and fell out. I machined one out of stainless and problem solved. I also never used that Chinese garbage they call hardware. I swapped it out for real stainless when I installed it. But coming from R/C cars I can tell you 3mm and smaller hex screws will get torn up unless you use a good quality tool to install them. Hex keys don't cut it.
Hustler, what pin do you speak of that won't let you release it?
Hustler, what pin do you speak of that won't let you release it?
#9
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
I've had my NRG for over 2 years now. No problems expect the safety button broke and fell out. I machined one out of stainless and problem solved. I also never used that Chinese garbage they call hardware. I swapped it out for real stainless when I installed it. But coming from R/C cars I can tell you 3mm and smaller hex screws will get torn up unless you use a good quality tool to install them. Hex keys don't cut it.
Hustler, what pin do you speak of that won't let you release it?
Hustler, what pin do you speak of that won't let you release it?
#10
Is the NRG design so fundamentally different than this one? I can't see how this would fail and not allow the wheel to come off.
I and some other people I know have used this for a long time without failing.
Sokool: what sort of tool should be used for the tiny hex bolts other than a hex key or socket? I've noticed the head gets messed up real easy when (un)installing a couple of times.
I and some other people I know have used this for a long time without failing.
Sokool: what sort of tool should be used for the tiny hex bolts other than a hex key or socket? I've noticed the head gets messed up real easy when (un)installing a couple of times.
#12
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,979
Total Cats: 356
Another reason why companies that ripoff valid, working products should die. If you can't even copy something right, why the **** should you be around? Yeah, WB is expensive ****, but I don't mind paying for top notch and SAFE products.
At least the churbochargers seem to outlive their genuine counterparts...
At least the churbochargers seem to outlive their genuine counterparts...
#13
Elite Member
iTrader: (2)
Join Date: May 2007
Location: Cromwell, Connecticut
Posts: 2,605
Total Cats: 16
I failed and didnt read the thread before posting. Ignore me
... hate when a company gives you a shitty product and could care less tho.
... hate when a company gives you a shitty product and could care less tho.
Last edited by 240_to_miata; 05-02-2011 at 08:56 PM.
#15
I personally use EDS Racing drivers. They were given to me as part of a sponsor deal back in the day and I absolutely loved them. But as I said any "good" quality hobby driver found at your local hobby shop will suffice.
http://www.edsracingproductsstore.co...d&productId=13
Watch out once you use one you will want matching screw drivers... LOL
#18
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,209
Total Cats: 1,139
http://ltbautosports.com/ltbquicrelsp.html
Only $135. Pretty sure I only paid $99 though...
Anyways, it's lasted about 5 years, no issues to date, and not $400.
Only $135. Pretty sure I only paid $99 though...
Anyways, it's lasted about 5 years, no issues to date, and not $400.
#19
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
I don't want the wheel any closer than it has to be, my arms are long.
I'm going to trash the cheap, allen screws and get long grade-8 bolts. Do any of the above examples let the wheel go on 1-way only?
This is the one I have:
That little pin fell out and now it won't come off.
I'm going to trash the cheap, allen screws and get long grade-8 bolts. Do any of the above examples let the wheel go on 1-way only?
This is the one I have:
That little pin fell out and now it won't come off.