The AI-generated cat pictures thread
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
Diagnosing a piece of gear today... Okay, there's no way i can make it sound like i'm not working on a garage door opener. So yeah, it's just a garage door opener.
Which makes this even more awesome in my opinion.
They actually put LED lights on the PCB to light it up. That way when you're 30' in the air, or in some dark shithole you can see what the hell your doing without a flashlight in your mouth.
Every manufacture that has equipment with a PCB that may end up in some dark pit needs these LEDs (which also swivel and move around). Why isn't everyone doing this? Maybe they are, it's the first i've seen it.
I don't know anything about EE or PCB design, but as an end user / dirty grunt who has to use it i really like this one. It's very thought out. Well labeled. Has literally all the information, switches, probe points, lights you will ever need plus the wiring diagram right next to it.
Which makes this even more awesome in my opinion.
They actually put LED lights on the PCB to light it up. That way when you're 30' in the air, or in some dark shithole you can see what the hell your doing without a flashlight in your mouth.
Every manufacture that has equipment with a PCB that may end up in some dark pit needs these LEDs (which also swivel and move around). Why isn't everyone doing this? Maybe they are, it's the first i've seen it.
I don't know anything about EE or PCB design, but as an end user / dirty grunt who has to use it i really like this one. It's very thought out. Well labeled. Has literally all the information, switches, probe points, lights you will ever need plus the wiring diagram right next to it.
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
I've worked on a lot of industrial electronics. First I've seen that. Please tell me who makes that board.
Ive also designed PCBs, more as a hobby, and adding the text is as easy as typing it out in the PCB design software. The only reason it shouldn't be done is when the board is over populated. Ive always thought most PCB designer were lazy AF. The silk screen mask doesn't really cost more whether it consists of just the PCB pt no, or the entire boards component compliment listed on it, or were talking maybe pennies at most.
Ive also designed PCBs, more as a hobby, and adding the text is as easy as typing it out in the PCB design software. The only reason it shouldn't be done is when the board is over populated. Ive always thought most PCB designer were lazy AF. The silk screen mask doesn't really cost more whether it consists of just the PCB pt no, or the entire boards component compliment listed on it, or were talking maybe pennies at most.
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,057
Total Cats: 6,617
I don't know anything about EE or PCB design, but as an end user / dirty grunt who has to use it i really like this one. It's very thought out. Well labeled. Has literally all the information, switches, probe points, lights you will ever need plus the wiring diagram right next to it.
And yeah, designers who don't hate people will put as much useful information onto the silkscreen as possible. That much, at least, is fairly common. When manufacturing PCBs on a production scale, adding additional info to the silkscreen costs nothing at all. Since it a photo process, manufacturing the screen itself is a fixed cost, regardless of how much detail is on it.
Also had a lovely afternoon up at the very top yesterday:
That puts a pit in my throat just thinking about how high that is.
We had a fancy dinner awhile back at place in downtown OKC, it's up on the 49th floor of the Devon tower. Even just the elevator ride up had me in a near panic.
We had a fancy dinner awhile back at place in downtown OKC, it's up on the 49th floor of the Devon tower. Even just the elevator ride up had me in a near panic.
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
You would have a hard time stopping me from climbing to the top
Related: I do not use my Fluke 87v in horrible places for fear of ruining it. So instead I use this, it's sufficient enough for what I do. Those probes cost more than the meter though. You can't have bad probes.
Related: I do not use my Fluke 87v in horrible places for fear of ruining it. So instead I use this, it's sufficient enough for what I do. Those probes cost more than the meter though. You can't have bad probes.
Elite Member
iTrader: (2)
Join Date: Jun 2009
Location: Istanbul, Turkey
Posts: 3,214
Total Cats: 1,687
Serious question:
It's always been my understanding that they are supposed to carve the doner in a spiral fashion, such that it remains roughly cylindrical and merely decreases in diameter as it goes, such that the meat being removed at any given time is always that which has the most char on it. Is this not, in fact, the actual custom in the homeland of this delicacy?
It's always been my understanding that they are supposed to carve the doner in a spiral fashion, such that it remains roughly cylindrical and merely decreases in diameter as it goes, such that the meat being removed at any given time is always that which has the most char on it. Is this not, in fact, the actual custom in the homeland of this delicacy?
Yes, the traditional method is carving so that it retains its round shape, but the new method allows for a more manageable "face" where you can carve nice sheets of meat as opposed to bits and pieces.
Also, a whole side of the square shape gets a chance to roast by the fire before it gets sliced.
Elite Member
iTrader: (2)
Join Date: Jun 2009
Location: Istanbul, Turkey
Posts: 3,214
Total Cats: 1,687
Time for a wastegate question..
Is this too close to the turbo housing?
Do I have to make a heat shield between the WG and the turbo housing here?
Or, are WGs inherently resistant to heat since they are made to handle hot exhaust gases running through them?
I AM NEW AT THIS TURBO THING!
Turbo is partially assembled on the bench for illustration purposes.
Is this too close to the turbo housing?
Do I have to make a heat shield between the WG and the turbo housing here?
Or, are WGs inherently resistant to heat since they are made to handle hot exhaust gases running through them?
I AM NEW AT THIS TURBO THING!
Turbo is partially assembled on the bench for illustration purposes.
Time for a wastegate question..
Is this too close to the turbo housing?
Do I have to make a heat shield between the WG and the turbo housing here?
Or, are WGs inherently resistant to heat since they are made to handle hot exhaust gases running through them?
I AM NEW AT THIS TURBO THING!
Turbo is partially assembled on the bench for illustration purposes.
Is this too close to the turbo housing?
Do I have to make a heat shield between the WG and the turbo housing here?
Or, are WGs inherently resistant to heat since they are made to handle hot exhaust gases running through them?
I AM NEW AT THIS TURBO THING!
Turbo is partially assembled on the bench for illustration purposes.
Elite Member
iTrader: (2)
Join Date: Jun 2009
Location: Istanbul, Turkey
Posts: 3,214
Total Cats: 1,687
Thank you guys..
Looks like it will have to be cut off and redone at a better angle.
Relocating it towards the back will definitely keep it cooler, AND I can make a decent heat shield for it.
Looks like it will have to be cut off and redone at a better angle.
Relocating it towards the back will definitely keep it cooler, AND I can make a decent heat shield for it.