My Old M1 Pics and Setup (56K Don't do it)
Thread Starter
Guest
iTrader: (6)
Joined: Sep 2007
Posts: 1,085
Total Cats: 1
From: Vaughan, On, Canada
My Old M1 Pics and Setup (56K Don't do it)
I'm certainly not new to Miatas, but I've found many don't remember my old M1 and some of the neato **** we (ETDRacing.com and I) used to play with.
Photoshoot for Sport Compact National Magazine..
1.39 60ft
Engine Bay in my 1990! Most I ever made with this setup was 498hp.
450hp Dyno Chart! I like the 50 shot of Nitrous!
I really miss this car, but I am quite happy I now have this M2! It has an old BEGi/FMII kit, but I am certainly going to upgrade it to a similar, but simple version of my old setup.
Enjoy.. More pictures will follow as I dig them up!
Photoshoot for Sport Compact National Magazine..
1.39 60ft
Engine Bay in my 1990! Most I ever made with this setup was 498hp.
450hp Dyno Chart! I like the 50 shot of Nitrous!
I really miss this car, but I am quite happy I now have this M2! It has an old BEGi/FMII kit, but I am certainly going to upgrade it to a similar, but simple version of my old setup.
Enjoy.. More pictures will follow as I dig them up!
Reply
0
0
Thread Starter
Guest
iTrader: (6)
Joined: Sep 2007
Posts: 1,085
Total Cats: 1
From: Vaughan, On, Canada
Miata Diff with KAAZ, vs 88 RX-7 Turbo II Diff
Miata Axles Vs Drivesaft Shop Level 5 Axles
RX7 Turbo II Diff Mounted
Diff was too close to the gas tank for my liking.. So I made room.
Drivesaft Shop Aluminum Driveshaft.
RX7 Tranny Adapter plate coming together.
Test Fitting it all together!
Strong Rear Setup on the floor. Gas Tank is getting installed.
Shifter looked good!
I miss this simple, but effective dash!
6 Point Roll Bar Setup
Reply
0
0
I love the torque dampener....******* chain ftw. hahahha
btw, when dropping the rear assembly...pull remove the PPF, brake hardlines, e-brake, shock mounts, and what like 4 bolts holding it up?
btw, when dropping the rear assembly...pull remove the PPF, brake hardlines, e-brake, shock mounts, and what like 4 bolts holding it up?
Reply
0
0
Parts of that setup will live on in others Miata's 
Amazing to see how far we have come in a few years, you can make that engine bay so much less complex now.
And speaking of that dash, it was in your basement last time I was over. You could put it on if you really wanted to, not that it would make sense in the M2.
Amazing to see how far we have come in a few years, you can make that engine bay so much less complex now.
And speaking of that dash, it was in your basement last time I was over. You could put it on if you really wanted to, not that it would make sense in the M2.
Reply
0
0
Reply
0
0
Thread Starter
Guest
iTrader: (6)
Joined: Sep 2007
Posts: 1,085
Total Cats: 1
From: Vaughan, On, Canada
Still miss this Miata but I have grown attached to the A/C and P/S in my current Miata NB and therefore have to do without some of the big power items I was used to.
This is the car John and I have which I piloted last year. Looking at changing the car around it bit. John@ETD and I just need to make power and play with cars.
This is John's All-Motor CRX he used to drive. It is sitting parked waiting for a new setup.
We both also own Mazda's. John@ETD has an 88 Aniversary RX7 and me the 2000 Miata.
This is the car John and I have which I piloted last year. Looking at changing the car around it bit. John@ETD and I just need to make power and play with cars.
This is John's All-Motor CRX he used to drive. It is sitting parked waiting for a new setup.
We both also own Mazda's. John@ETD has an 88 Aniversary RX7 and me the 2000 Miata.
Reply
0
0
Reply
0
0
