1.6L pnpecu install TPS and ST_SIGN fuse question
#1
1.6L pnpecu install TPS and ST_SIGN fuse question
so i finally got my ecu in from stratified auto in canada and I went online to install it and the only thing the directions tell me to do are disconnect the old ecu and put in the new one and run the vacuum hose to the intake manifold. However i came across this
http://www.boostedmiata.com/MS/msq/i...uctions_TS.pdf
which lists that the 1.6L motor needs to have the TPS disconnected and also I need to remove the ST_SIGN fuse and then not put it back.
I am a little confused as to which directions are correct since the directions that come with the PNP do not mention needing to mess with those 2 things but the other instructions list it can cause major problems if they are not done.
I have written to the company but any help would be great.
Thank you
http://www.boostedmiata.com/MS/msq/i...uctions_TS.pdf
which lists that the 1.6L motor needs to have the TPS disconnected and also I need to remove the ST_SIGN fuse and then not put it back.
I am a little confused as to which directions are correct since the directions that come with the PNP do not mention needing to mess with those 2 things but the other instructions list it can cause major problems if they are not done.
I have written to the company but any help would be great.
Thank you
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM