TunerStudio CAN exchange log?
#1
Junior Member
Thread Starter
Join Date: May 2012
Location: Jersey City, NJ
Posts: 133
Total Cats: 20
TunerStudio CAN exchange log?
I do not own a MEGAsquirt myself and I am mostly interested in TunerStudio but since it's usually used with MS hopefully it would be fine to ask here.
Would anyone who connects his MEGAsquirt with TS over CAN be available to sniff the CANbus exchange between these two? Even a log with "Debug Log Comm" might actually work for me.
I am trying to implement CAN TunerStudio protocol in my own ECU, and unfortunately while EFI Analytics has nothing against they do not have much documentation to share.
Would anyone who connects his MEGAsquirt with TS over CAN be available to sniff the CANbus exchange between these two? Even a log with "Debug Log Comm" might actually work for me.
I am trying to implement CAN TunerStudio protocol in my own ECU, and unfortunately while EFI Analytics has nothing against they do not have much documentation to share.
#4
Junior Member
Thread Starter
Join Date: May 2012
Location: Jersey City, NJ
Posts: 133
Total Cats: 20
from some default .ini files:
but it could be that I am misunderstanding it
Code:
;This enables the "full" CAN/serial commands so this INI can be used anywhere on the CAN network except a direct serial connection. #set CAN_COMMANDS
#5
Senior Member
iTrader: (1)
Join Date: Sep 2011
Location: Lambertville, NJ
Posts: 1,215
Total Cats: 74
Just looked at the communication setup in TS- CAN is not mentioned anywhere....
Sniffing the data packets send by MS on the CAN bus during normal operation should be fairly easy. I have messed with that a year or two back and was able to read all the broadcast data. Also sending data to the MS during normal operation seems pretty straightforward.
Sniffing the data packets send by MS on the CAN bus during normal operation should be fairly easy. I have messed with that a year or two back and was able to read all the broadcast data. Also sending data to the MS during normal operation seems pretty straightforward.
#6
Junior Member
Thread Starter
Join Date: May 2012
Location: Jersey City, NJ
Posts: 133
Total Cats: 20
With my .ini file here is what I get when I create a project, I am not sure if you can adjust this once the project is already created:
#10
Senior Member
iTrader: (1)
Join Date: Sep 2011
Location: Lambertville, NJ
Posts: 1,215
Total Cats: 74
There's some decent info here:
Megasquirt Support Forum (MSEXTRA) ? Problem connecting after upgrade to ms3 R1.1.2 (View topic)
Megasquirt Support Forum (MSEXTRA) ? Problem connecting after upgrade to ms3 R1.1.2 (View topic)
#11
Junior Member
Thread Starter
Join Date: May 2012
Location: Jersey City, NJ
Posts: 133
Total Cats: 20
There's some decent info here:
Megasquirt Support Forum (MSEXTRA) ? Problem connecting after upgrade to ms3 R1.1.2 (View topic)
Megasquirt Support Forum (MSEXTRA) ? Problem connecting after upgrade to ms3 R1.1.2 (View topic)
#12
Senior Member
iTrader: (1)
Join Date: Sep 2011
Location: Lambertville, NJ
Posts: 1,215
Total Cats: 74
Of course sniffing the serial comm between TS and MS should be fairly easy, provided we're not using the on-board USB on MS3. But the earliest I would be able to help with that would be after Christmas.
Thread
Thread Starter
Forum
Replies
Last Post
vteckiller2000
Miata parts for sale/trade
8
12-12-2015 08:16 PM