Cold start, warmup issue
#21
Elite Member
Thread Starter
iTrader: (24)
Join Date: Oct 2006
Location: Monterey, CA
Posts: 7,537
Total Cats: 42
How so? How does it differ from the code loaded into the PNP originally? (edit - as in what's so different that it can do all those wonderful things) Are there any drawbacks?
I may do this before dynotime!
I may do this before dynotime!
#24
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
You must not have the newest version. When on the internet, have it check for upgrades and get the newest version. It's got some good improvements/updates worth having. But it does nag the **** out of you. I thought I read that when you buy a PNP, it comes with a license for the software, but that could be my memory being factitious.
#26
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
#34
Elite Member
Thread Starter
iTrader: (24)
Join Date: Oct 2006
Location: Monterey, CA
Posts: 7,537
Total Cats: 42
I tried it again, answering NO, and it worked. Loaded my old .msq and she started right up, but runs/idles way rich. I suppose now is as good a time as any to get schooled on this VE analyzer I've heard so much about!
Oh, also, in megatune my AFR "gauge" reads in the single digits (doesn't match tangible gauge), where was the menu to change to "AEM linear"?? We had it before but I couldn't find it just now.
For whatever reason, I didn't! Weird, because I was expecting to have to after all that.
#36
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
Cool. You're going to have to retune the entire fuel table, and you're going to idle rich as ballz until you've got the coolant related density BS figured out. I'm still working on that myself.
You'll need to go to the CONFIGURATOR to set up for the WB. And you'll want to check your closed loop settings and target table.
You'll need to go to the CONFIGURATOR to set up for the WB. And you'll want to check your closed loop settings and target table.
#37
Elite Member
Thread Starter
iTrader: (24)
Join Date: Oct 2006
Location: Monterey, CA
Posts: 7,537
Total Cats: 42
Great, thanks. So I suppose a fix is in the works for the coolant related density BS?
I'm about to go datalog a bit. Ben, what do you use for targets when "tuning" with VE analyzer?
I'm about to go datalog a bit. Ben, what do you use for targets when "tuning" with VE analyzer?
#39
Elite Member
Thread Starter
iTrader: (24)
Join Date: Oct 2006
Location: Monterey, CA
Posts: 7,537
Total Cats: 42
Cool, thanks!
So, I tried to manipulate the settings.ini to use the WB02 (changed the NB to "unset" and AEM linear to "set") and no dice, because ******* windows won't let me save it. I did about a 15-20 minute datalog anyway, let's see if MLV will convert the values for me or not...
So, I tried to manipulate the settings.ini to use the WB02 (changed the NB to "unset" and AEM linear to "set") and no dice, because ******* windows won't let me save it. I did about a 15-20 minute datalog anyway, let's see if MLV will convert the values for me or not...