dead coil-again
#21
Did you recheck the gray shielded tach wire? Better yet, install a new one. That fixed my problem.
Also, do all three of your LED's light up?
I would skip another coil, Just go for COPS, These ignitors in the 94-97 are very sensitive, believe me I've smoked what, 4 sets now between 2 cars??? ( I lost count)...
Also, do all three of your LED's light up?
I would skip another coil, Just go for COPS, These ignitors in the 94-97 are very sensitive, believe me I've smoked what, 4 sets now between 2 cars??? ( I lost count)...
#22
Elite Member
Thread Starter
iTrader: (39)
Join Date: Sep 2007
Location: High Point NC
Posts: 4,850
Total Cats: 8
none of the LED's light up, they are reversed...i know
what gray wire are you talking about, you are giving me hope here...lol
where is it located? on the MS harness?
so, you had the same problem, just one coil would go out before you even start cranking?
i started messing around with a COP idea, i may have them done soon...
thanks for all your help man
what gray wire are you talking about, you are giving me hope here...lol
where is it located? on the MS harness?
so, you had the same problem, just one coil would go out before you even start cranking?
i started messing around with a COP idea, i may have them done soon...
thanks for all your help man
#25
Elite Member
Thread Starter
iTrader: (39)
Join Date: Sep 2007
Location: High Point NC
Posts: 4,850
Total Cats: 8
alright, i figured everyone would like to hear that my MS issues seems to be resolved, well not yet but at least we know what was killing my coils...
this is my board
this is what its supposed to look like
anyone see whats wrong??? lol
i am so relieved, thanks for all your help scott
i will report with results probably this weekend
cross yo fingas errbody lol
ps. in case you dont see whats wrong, look at the two resistors by the LEDs and look closely for location where they are supposed to be on the board
this is my board
this is what its supposed to look like
anyone see whats wrong??? lol
i am so relieved, thanks for all your help scott
i will report with results probably this weekend
cross yo fingas errbody lol
ps. in case you dont see whats wrong, look at the two resistors by the LEDs and look closely for location where they are supposed to be on the board
#26
Elite Member
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
alright, i figured everyone would like to hear that my MS issues seems to be resolved, well not yet but at least we know what was killing my coils...
this is my board
anyone see whats wrong??? lol
i am so relieved, thanks for all your help scott
i will report with results probably this weekend
cross yo fingas errbody lol
ps. in case you dont see whats wrong, look at the two resistors by the LEDs and look closely for location where they are supposed to be on the board
this is my board
anyone see whats wrong??? lol
i am so relieved, thanks for all your help scott
i will report with results probably this weekend
cross yo fingas errbody lol
ps. in case you dont see whats wrong, look at the two resistors by the LEDs and look closely for location where they are supposed to be on the board
If indeed this fixes it I think this would then a good time to consider cops. If a dumbass like me can do them anybody can!:gay:
I'll be glad to hear you've had no issues either.
about your p.s.; even I could see that!
I'm dying to see your car turboed!
#27
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
there's no doubt that's what wrong. simply put, the warmup output was constantly supplying some voltage to the coils. this killed them. which is why one coil died and not the other.
I spent all day today staring at the picture, sent it to chad who didn't see aproblem and even Abe, then we starting discussing it and then it became obvious, so obvious that i feel like a retarded retard.
I was at the point where I was going to have Dan just send me that MS back and I'd give him my working one.
I spent all day today staring at the picture, sent it to chad who didn't see aproblem and even Abe, then we starting discussing it and then it became obvious, so obvious that i feel like a retarded retard.
I was at the point where I was going to have Dan just send me that MS back and I'd give him my working one.
#28
No joke. I feel like an idiot not noticing that. After looking at MS after MS you think we would know better.
The funnier thing was i hit page end and read that post from the bottom up. So i stared at the correct image for like 5 minutes trying to figure out what was wrong with the LEDs. Then i realized there were two pictures. Man i'm slow today.
The funnier thing was i hit page end and read that post from the bottom up. So i stared at the correct image for like 5 minutes trying to figure out what was wrong with the LEDs. Then i realized there were two pictures. Man i'm slow today.
#29
Elite Member
Thread Starter
iTrader: (39)
Join Date: Sep 2007
Location: High Point NC
Posts: 4,850
Total Cats: 8
No joke. I feel like an idiot not noticing that. After looking at MS after MS you think we would know better.
The funnier thing was i hit page end and read that post from the bottom up. So i stared at the correct image for like 5 minutes trying to figure out what was wrong with the LEDs. Then i realized there were two pictures. Man i'm slow today.
The funnier thing was i hit page end and read that post from the bottom up. So i stared at the correct image for like 5 minutes trying to figure out what was wrong with the LEDs. Then i realized there were two pictures. Man i'm slow today.
scott, thanks again a bunch...
spaniard, im rigth there with ya buddy, thanks for the positive wishes
as far as COPs go im in the process of making a harness that uses stock coil connectors to remain PnP and is reversable in minutes...im in the starting stages though, could be done this weekend, ill post pics
#30
Elite Member
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
Dan, you just made my year. I don't know **** about MS but when I saw your pics I could see the 2 resistors (shows you how much I know; I had to look back to your post to re-read their names!) that both Braineack and Chad couldn't see, WOW.
Just in case I get on their wrong side; Chad and Braineack:
hahaha. :gay::gay::gay:
Let me know if you're already running the car and if so how does it feel?
Rafa
Just in case I get on their wrong side; Chad and Braineack:
hahaha. :gay::gay::gay:
Let me know if you're already running the car and if so how does it feel?
Rafa
#32
Elite Member
Thread Starter
iTrader: (39)
Join Date: Sep 2007
Location: High Point NC
Posts: 4,850
Total Cats: 8
Spaniard, keep in mind, when we were looking at my board, we didnt think to put a picture of a good one next to it, we were just looking at my board by itself, that makes it a lot harder, lol
it looks so easy now when you put two of them next to each other, wish we would have thought of that sooner, but oh well
also, im not near my car, about 100 miles (160km, for you, lol) away adn wont be able to touch it until saturday...so i can not wait to give it a shot tomorrow, if it all works out the COPs are next and then boooooooooooooooost yay
some people understand me, but i must say, it took some serious self control to do it the right way, i've been bit by the boost bug for a long time now but wanted to do the MS first and i think im finaly there
thanks everyone for your help
it looks so easy now when you put two of them next to each other, wish we would have thought of that sooner, but oh well
also, im not near my car, about 100 miles (160km, for you, lol) away adn wont be able to touch it until saturday...so i can not wait to give it a shot tomorrow, if it all works out the COPs are next and then boooooooooooooooost yay
some people understand me, but i must say, it took some serious self control to do it the right way, i've been bit by the boost bug for a long time now but wanted to do the MS first and i think im finaly there
thanks everyone for your help
#33
Elite Member
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
Spaniard, keep in mind, when we were looking at my board, we didnt think to put a picture of a good one next to it, we were just looking at my board by itself, that makes it a lot harder, lol
it looks so easy now when you put two of them next to each other, wish we would have thought of that sooner, but oh well
also, im not near my car, about 100 miles (160km, for you, lol) away adn wont be able to touch it until saturday...so i can not wait to give it a shot tomorrow, if it all works out the COPs are next and then boooooooooooooooost yay
some people understand me, but i must say, it took some serious self control to do it the right way, i've been bit by the boost bug for a long time now but wanted to do the MS first and i think im finaly there
thanks everyone for your help
it looks so easy now when you put two of them next to each other, wish we would have thought of that sooner, but oh well
also, im not near my car, about 100 miles (160km, for you, lol) away adn wont be able to touch it until saturday...so i can not wait to give it a shot tomorrow, if it all works out the COPs are next and then boooooooooooooooost yay
some people understand me, but i must say, it took some serious self control to do it the right way, i've been bit by the boost bug for a long time now but wanted to do the MS first and i think im finaly there
thanks everyone for your help
BTW, I concur with you. You've gone about your project in the same manner wanted to tackle mine. I always wanted to put in a new EMS before going turbo. Circumstances beyond my control prevented me from doing so and we got to November which was the date I had originally planned to turbo my car. This decision was based on local weather (from November on until March it gets a little cooler down here and I've always been scared of the Miata's cooling system).
FWIW, many moons ago I used to think in Kms/ per hour only. Even though I still convert the figures in my head I finally got used to miles per hour.
Thanks for all your assistance. I plan to bother you again. I saw some of your posts in another thread about suspension settings and I'm not happy with mine.
Regards,
Rafa
#34
glad to see this thing resolved.
Even more glad not having to listen to your BS. JK friend lets make it work this weekend, maybe even solve my vacuum problem. I guess **** happens and even Braineacks can make mistakes. don't take it the wrong way i do give you credit building these things.
Even more glad not having to listen to your BS. JK friend lets make it work this weekend, maybe even solve my vacuum problem. I guess **** happens and even Braineacks can make mistakes. don't take it the wrong way i do give you credit building these things.
#36
Elite Member
Thread Starter
iTrader: (39)
Join Date: Sep 2007
Location: High Point NC
Posts: 4,850
Total Cats: 8
great success, running rich but its running...thanks all, ill be posting more later, gotta go try and tune it a bit...
any suggestions lemme know, its around 10-11afr running without MAF
any suggestions lemme know, its around 10-11afr running without MAF
Thread
Thread Starter
Forum
Replies
Last Post
Nagase
Suspension, Brakes, Drivetrain
25
10-06-2015 12:34 AM