How do I set up a shift light on my 96-97 Megasquirt PNP
#1
Senior Member
Thread Starter
iTrader: (11)
Join Date: Sep 2007
Location: Killen, AL, 35645
Posts: 794
Total Cats: 10
How do I set up a shift light on my 96-97 Megasquirt PNP
Hey guys I need to know how to set up a shift light for my 96-97 Megasquirt PNP. Which pin do I tap into on the unused ten pin harness. I will be using a 12v 10mm LED light that comes on at 6200 RPM.
#2
This link tells you more about how you can use a shift light.
http://www.msextra.com/manuals/MS_Ex...l.htm#shiftled
You have to build a small circuit for it to work right I believe. The processor itself might be able to pull your shift light to ground but i have no idea what current its capable of controlling. If i was going to do this I would build the circuit for the relay switching and set it up appropriately.
http://www.msextra.com/manuals/MS_Ex...l.htm#shiftled
You have to build a small circuit for it to work right I believe. The processor itself might be able to pull your shift light to ground but i have no idea what current its capable of controlling. If i was going to do this I would build the circuit for the relay switching and set it up appropriately.
Thread
Thread Starter
Forum
Replies
Last Post