Hi Guys,

i installed today a DIYPNP on a Friends car and i wont start with that.
We installed also my DIY on his car, and it fired up right away.

Have anyone a idea, what can be wrong with the other ?

Please help us.

Thank you

 

its not syncing. probably built incorrectly.

 

We double checkt all parts and didnt find any diffrent to the other DIYPNP.

Damn.. i think that thing is broken..
Brain, what will you take to make us a new one and ship it to Austria / Europe ?

 

what does the composite log of cranking look like?

 

RPM shows there only 1, nothing other special is showing

 

composite log will log the CAS inputs... it will let you know if that signal is being brought in correctly.

 

hm, i showed there but i didnt see anything intersting there, nothing was showing on the right side, now we have the diypnp no longer installed, so i cant check it again.

We also have checked the Spark output, but no sparks coming.

 

it wont spark unless it gets a good CAS signal. and why i want you to look at the composite log during cranking.

 

ok, i will check it again, and make a screenshot.

 

First, i wasnt at the car yet, but i did a third check on the Board.

All Capatitors are on right place and on right polarition.
I also reflashed the DIYPNP and i am not sure but i think first time i selectet MS2 instand of Microsquirt, can that be the problem?

 

it can be a problem.

 

it was the problem, thank you anyway for fast support

 

Using the wrong firmware type does weird things to the ignition. Glad you got it cleared up.