Wanting some feedback from some of you experienced MS users.

Helping a friend get a good street tune on his e30.

Specs on car:
87 325is e30
MS2 v2.0.1
Stock M20 with ARPs, standard CR, headgasket, etc.
GT3076 (.63 A/R turbine)
666 mani adapter
Tial 38mm wg
Synapse Synchronic BOV
24x12x3 IC
2.5" piping
3" mandrel self-made exhaust...standard stuff
MS2v3 with Innovative LC-1
Bosch 044, Siemens Deka 63 lb/hr injectors


Here's the current msq:
tune-3-19-10-8-50-leak.msq - download now for free. File sharing. Software file sharing. Free file hosting. File upload. FileFactory.com

and the logs:
log1-19-10-6-37-pm.xls - download now for free. File sharing. Software file sharing. Free file hosting. File upload. FileFactory.com
log1-19-10-8-09-pm.xls - download now for free. File sharing. Software file sharing. Free file hosting. File upload. FileFactory.com
log841.xls - download now for free. File sharing. Software file sharing. Free file hosting. File upload. FileFactory.com

Log 6-37 was actually on a little different tune but very close.

I've ran into a problem on megalogview. I can't get the afr to display correctly. It reads in Megatune fine. I've tried the three different options for the lc1 but it still doesnt display correctly. Maybe the lc1 isnt calibrated right?

Oh yeah, on log 841 and toward the end of 809 there was a vaccum leak. On 809 it wouldn't cut out unless he rolled onto in 5th, pulled in 1st-4th fine.

thx in advance!

 

I believe the TPS sensor or the wiring for it is bad. Don't think it had a vacuum leak actually.

Everytime the car bucked the throttle is shown as closed on the logs.

Anyone else see anything funky?!