hey sup guys! need a lil help here. have a 96 miata, ms1extra running parallel. i have a zeitronics wide band. i had it working before. but on the old setting i was burning up coils. so im running DIY map and setting, i just loaded there whole pnp set up. i got everything working oright except for the wide band. i went to configuration and set my wide band to zetronics non liniar and saved it. but nothing it seems like its still set on norrow band?

anything would help i kinda have a appointment at a dyno and im not trying to use a tail sniffer..

 

did you set it as WB in MegaTune as well as the Configurator?

 

i did it in config but i could not find where in mega tune. all i see in mega tune is like afr targets but not setting. where in mega tune do i go?

 

go to engine basic settings > exhaust settings

change narrowband to wideband and change the switching point to 2.5v

 

life saver............ when you come to miami let me know drinks on me.......
thanks ill try it and let u know

 

hey guys no luck still seems like its in narrow anything else to suggest?

 

so what exactly do you mean it seems "like its in narrow?"

what makes you think that? the only other thing is opening configurator and making sure your lamda_sensor is set correctly.

 

well it moves very abruptly and sits at 14.88 when idle and goes to 14.7 when driving nothing between. i mean i had it working before so i know what it acts like. but it not working now maybe the sensor went or something ?

 

double check configurator. that's all i can think of.

also double check you really aren't running the narrowband