hey, where can i find the thread to make the harness for a '91 going standalone?
the one that's already posted is for a 94+ and i know they're different.
any help would be appreciated.
i've got a ms1 with the connector to make it plug and play at the harness. i wanna build the harness.
please let me know if i'm confusing anyone. thanks!

 

https://www.miataturbo.net/forum/t29685/

this should help.......look at post #3, very helpful.

 

cool! thanks man! i knew i saw something like that before. i'll build it up tomorow and see if it runs or what. thanks again!

 

double check all the wires and their pins on your harness. my injector blue and greens (32/33 and 33/34) were switched by accident. must have been built on a monday.

 

Hi
My diagram is still a bit of a work in progress. What I didn't put into the diagram and according to people who know more than me (in the link below), is that if you are using a 90-93 TPS you dont connect pin 22 and pin 26. I didn't know this at the time, but have left the wires in anyways, for later, if I end up wanting to update my TPS to a proper position sensor rather than the on/off switch the 90-93's come out with.

90-93 DB37 Pinout