I updated to TS1.14 and I have errors
Thread Starter
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
I updated to TS1.14 and I have errors
I get these warnings when I load the same old .msq to the same old project file:
17 Warnings:
Warning: IdleDelayTime row:0, col:0, Value higher than maximum: 195.0, Set to the maximum value: 5.0
Warning: LC_f_slim row:0, col:0, Value below than minimum: 0.0, Set to the minimum value: 3000.0
Warning: LC_flatlim row:0, col:0, Value below than minimum: 100.0, Set to the minimum value: 3000.0
Warning: outaoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outcoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outdoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outeoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outboffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outfoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: Nos2RpmMax row:0, col:0, Value higher than maximum: 25500.0, Set to the maximum value: 25000.0
Warning: splitrpmBins row:0, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:1, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:2, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:3, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:4, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:5, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: IATCorS row:6, col:0, Value higher than maximum: 155.0, Set to the maximum value: 150.0
Warning: IdleDelayTime row:0, col:0, Value higher than maximum: 195.0, Set to the maximum value: 5.0
Warning: LC_f_slim row:0, col:0, Value below than minimum: 0.0, Set to the minimum value: 3000.0
Warning: LC_flatlim row:0, col:0, Value below than minimum: 100.0, Set to the minimum value: 3000.0
Warning: outaoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outcoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outdoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outeoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outboffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: outfoffv row:0, col:0, Value higher than maximum: 89.76, Set to the maximum value: 45.0
Warning: Nos2RpmMax row:0, col:0, Value higher than maximum: 25500.0, Set to the maximum value: 25000.0
Warning: splitrpmBins row:0, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:1, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:2, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:3, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:4, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: splitrpmBins row:5, col:0, Value below than minimum: 0.0, Set to the minimum value: 100.0
Warning: IATCorS row:6, col:0, Value higher than maximum: 155.0, Set to the maximum value: 150.0
Reply
0
0
Thread Starter
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Reply
0
0
I read that I am not suppose to tinker with settings if the MS is not connected to the laptop. Only thing I am doing is loading other people's maps to compare, and thats about it, for now the ones I am loading to study are those you gave to gregg in the other thread.
It is strange as it does not give any firmware errors, and is the same info under Controller window when loading the map. But when it is loaded i get the error prompt again. Have to cycle the software, reload mine and it is gone.
It is strange as it does not give any firmware errors, and is the same info under Controller window when loading the map. But when it is loaded i get the error prompt again. Have to cycle the software, reload mine and it is gone.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
Oct 26, 2018 11:00 PM
