Hey Found, do you offer like 2 ft of wire with the ends crimped for the IAT?

I have the solenoid but i need the 2 wires crimped on both ends.

 

They sell the connector pigtail if thats what you mean.

 

If you're in a hurry you could solder wires to the pins, fill it with silicone then put some bullet connectors on the wires to make your own pigtail.
Otherwise you might be able to get the pigtail at autozone. I got mine at the local junkyard for nothing, he just gave it to me.

 

The pigtail is like 6" but you could easily extend it. We generally sell the connector or pigtail with the sensor as that's how we buy them as a package...

 

I got the 6" pigtail. Ran the one wire from MS to the sensor and then ran the gnd wire straigh to the point by my TB that the ECU and everything else gnds at. Worked well.

 

i bought the AIT package and i got the sensor 4 connectors and nothing else. Can i buy from you the wire with the connections already made on both ends?

i can splice in the middle to extend, i just want the wire to have the 2 connectors on both ends (male one side, female other)

 

hmm? isn't the AIT just blade connectors or is the one with the pnp different from the one i ordered?

 

Is this what you have?

Because I don't understand what you're trying to say. Just crimp those pins onto some wire and put them in the connector.

 

Ah kind of but my plug had a pigtail on it. even so the males on the ait is just a mini blade.

 

i got that CJ. But when crimping i fucked them up, so i need new connectors anyway. i just want him to crimp them for me on both ends.

 

Let's back up. What did you order... part# please. I'm guessing you ordered the MSPNP_IAT-S which is the AFM/MAF delete kit for the MSPNP. It comes with male pins for one end (that poke into your MAF/AFM connector) and female pins that go into the IAT sensors connector. You need a pretty standard hand crimper to assemble this, available at most electronics stores. We don't assemble them up front as different people put their IAT sensors in different places so the wire lengths needed varies.

If you want one assembled, you could contact us at websales@diyautotune.com and we'll work something out with you. You'll either want to send back the kit you purchased or purchase another one for us to assemble and send to you. Cost won't be much depending on how long it takes my guys to do it, not long though.

 

Gotcha-- same deal, shoot us an email and you can grab a new kit and have the guys crimp it for you for a few bucks.