Inclining Idle after Startup
04-16-2016, 02:08 PM
#1
Newb
Thread Starter
Join Date: May 2015
Posts: 7
Total Cats: 1
Inclining Idle after Startup
Hey guys, thanks for the help on actually getting the car to start. Now that is out of the way, I noticed the idle is really high and it sounds as if it is climbing.
I have no tach signal on TunerStudio nor the actual cluster. This is a '02 VVT longblock swapped into a '90 Chassis. I am using an MSLabs MS3 by Rev. Everything was wired according to the VVT Swap guide on here. The only exception is I am using Fab9 COP's and Ignitor. Any idea of what can be done to solve this dilemma ?
I have no tach signal on TunerStudio nor the actual cluster. This is a '02 VVT longblock swapped into a '90 Chassis. I am using an MSLabs MS3 by Rev. Everything was wired according to the VVT Swap guide on here. The only exception is I am using Fab9 COP's and Ignitor. Any idea of what can be done to solve this dilemma ?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
sickmiatabra
MEGAsquirt
0
04-13-2016 09:54 PM
