Where can I buy fuel injector connectors/plugs for my stock miata injectors?
I dont want to hack into the factory injector wiring so i would rather buy new connectors and make my own wiring.
TIA

 

Why not just get injectors from the FAQ that plug in?

 

+1 on a PnP injector...

you can find pigtails anywhere however...

 

i wasn't able to remove the FI harness from my car. one of its connectors is behind the head, and I was afraid that I would not be able to reconnect it to the new harness. so I put new injector clips on my original harness. took 10 minutes to make the 8 connections, plus another 5 to tape it all up to look like stock.

 

+1 i just used bullets on mine so it was reversable.

 

I want to use my existing injectors and I want to make a dedicated wiring harness for the injectors that would be connected to my megasquirt system.

 

so you want to run 8 injectors? i dunno if you can do that staged.

 

why? the ms can run 4 big injectors just fine.

 

i think he has injectors other than the oem ones....

it's easier just to wire in the pigtails...then just use the ones you need. so you have a total of 8 clips, but 4 injectors...

 

Why use ms as a sub injector controller when you can just run MS as stand alone?

 

well he needs to ******* lean english
and say "please" and "thankyou"

 

 

I have a stock injector harness (not sure if it's the 94 or the 2000 o.O) that I think I'm going to cannibalize for the plug that interfaces to the main harness. I suppose I could sell the stock connectors (actually, I could sell pretty much the whole harness minus the connector at the end). What's your budget?

-Mike

 

$20.00 plus postage? i need to find out what year its from though. I dont know if 1.8 connectors are compatible with 1.6 injectors.

 

Lets simplify the question:
I am looking for injector connectors. where can i buy them?
I dont want to cut and plice into the existing factory injector wiring harness.
that was easy!

 

which injector connectors?

DSM, FORD, etc.

 

Just pull them from the car that has the injectors you want. but seriusly unless you want to run some non PNP injectors why change. And if you are then why does 8 wire splices scare you so we run batch fire injection geez. The harness comes off the car easily, and the wires are just wires. Why make more work?

 

they're not

 

90 mazda miata 1.6l engine

 

Private Pyle, why do you need new mazda injector connectors? You already have them on your mazda engine.