injectors timing table VS adjust timing based on cam
#1
injectors timing table VS adjust timing based on cam
Hi All,
I am having a little issue when the engine reach the min temp under the VVT settings.
When the VVT goes into action (goes above the min temp in the pic below) I am having a small "bump", looking at the logs I found that the "injector timing pri" variable goes from 360 (my injector timing table is 360 all over) to 84, so I guess the "bump" I am feeling relates to this.
Injector timing table.
Log
When i set the "adjust timing based on" off, there is no "bump" and the "Injector timing pri" remain at 360.
Appreciate it if someone could explain for which setup/application I should turn off the "adjust timing based on cam" and for which setup/application is should be turned on.
log and tune file are attached
Thanks!
I am having a little issue when the engine reach the min temp under the VVT settings.
When the VVT goes into action (goes above the min temp in the pic below) I am having a small "bump", looking at the logs I found that the "injector timing pri" variable goes from 360 (my injector timing table is 360 all over) to 84, so I guess the "bump" I am feeling relates to this.
Injector timing table.
Log
When i set the "adjust timing based on" off, there is no "bump" and the "Injector timing pri" remain at 360.
Appreciate it if someone could explain for which setup/application I should turn off the "adjust timing based on cam" and for which setup/application is should be turned on.
log and tune file are attached
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
f1luva92
MEGAsquirt
13
02-10-2008 10:09 PM