Do my tables look good?
#1
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Do my tables look good?
Hopefully starting up with the turbo for the first time today. I have been running N/A on MS for a few months and tried my best to scale all my maps.
For fuel I took the map that I had, which was tuned up to 100kpa, but had rows up to 200. I noticed that autotune had been adding fuel the whole time so I added a bunch of fuel in boost and will have autotune pull fuel if needed.
Running an AFR table I found from I believe sixshooter. Said it was a good safe map for boost.
Timing is DIY base map.
Any other tables I should check?
For fuel I took the map that I had, which was tuned up to 100kpa, but had rows up to 200. I noticed that autotune had been adding fuel the whole time so I added a bunch of fuel in boost and will have autotune pull fuel if needed.
Running an AFR table I found from I believe sixshooter. Said it was a good safe map for boost.
Timing is DIY base map.
Any other tables I should check?
#10
you're asking if your tables look good after importing a base map and not touching it? lol
you're on the right track though.
I'll comment on the ve table since that seems to be the only one you "tuned": there are drops in it that are way too abrupt, like 45 to 66 to 38 on the bottom. I know the requirements for fuel down there go up and down, but it shouldnt' be as abrupt, and also should be more smooth.
just my .02
you're on the right track though.
I'll comment on the ve table since that seems to be the only one you "tuned": there are drops in it that are way too abrupt, like 45 to 66 to 38 on the bottom. I know the requirements for fuel down there go up and down, but it shouldnt' be as abrupt, and also should be more smooth.
just my .02
#11
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Multiple people have told me to just run the DIY base map for timing until i can get on a dyno because it is safe. Thanks for the comment on the fuel table. I will look into it.
And I guess good isn't the right word. I was more asking "this is my first turbo startup, these maps won't kill my car right?"
And I guess good isn't the right word. I was more asking "this is my first turbo startup, these maps won't kill my car right?"
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM