baylordrivingclub

Hey Y'all,

I'm from the Baylor Driving Club and I recently introduced us and our project (95 Mx5 for the 2010 Grassroots Challenge).

To cut some corners and save money in our budget, we were planning on doing a DIY megasquirt, where you build your own.

http://www.diyautotune.com/catalog/m...-kit-p-28.html

Anybody have any experience with this?

lordrigamus

iTrader: (14)

Welcome!!!

Haha, yes I would say there's a few people here with the experience you seek. There's even a few who will build you one if you desire.

I would go with the V3.0 board though. The V2.2 is a little outdated and has less features if I remember correctly. Check out the Megasquirt section, everything you need to know is in there.

curly

iTrader: (25)

Only half the board has MS, lulz. About 2/3rds of that are DIY MS I'd say. If you're good with a solder gun go ahead and have fun, otherwise like lordrigamus said there are a number of people on the board that can build you one for various profits for themselves.

AlexO35

iTrader: (7)

If you have the time, I'd suggest building your own.

The build goes very smoothly with the build manual and a DIY Auto Tune kit. All the information you need is here. You'll understand more of the entire system building it, and will be in for a smoother MS process. IMO.
--Alex

clay

iTrader: (6)

Follow the instructions step by step here:
https://www.miataturbo.net/useful-saved-posts-8/how-make-install-your-own-diy-megasquirt-13676/

Braineack

iTrader: (62)

There's a lot of things I need to update on that writeup....