MS-II - Let's see how it goes...
#1
Elite Member
Thread Starter
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,977
Total Cats: 356
MS-II - Let's see how it goes...
I ordered two MS-II units today from DIYautotune for my 2002 and for my boss' Toyota AE86 drift car. I'll let you guys know how it goes once I get to it.
Jim
Jim
#4
Elite Member
Thread Starter
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,977
Total Cats: 356
I'll try MS-II Extra with the experimental 99-00 wheel support first and see if that works out. If it doesnt and James/Ken are too busy to bother, I'll try my circuit instead. I currently have no idea if James' code needs the cam signal to be in perfect sync (degrees) in relation to the crank signal, but if it does, that will be a problem as I have VVT and that ***** up the whole show (in which case I will need to use my circuit instead).
Jim
Jim
#10
Elite Member
Thread Starter
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,977
Total Cats: 356
Jim
#11
I'm very interested in what path you take. AbeFM and I just have been discussing input circuits for the crank and cam sensors. If I can be any help at all, post or PM.
Have you put your O-scope on the VVT signal yet?
Y8S, The cam signal is used for sync only. The crank teeth are interrupts and trigger "events" in SW.
Have you put your O-scope on the VVT signal yet?
Y8S, The cam signal is used for sync only. The crank teeth are interrupts and trigger "events" in SW.
Thread
Thread Starter
Forum
Replies
Last Post