Megasquirt vs Microsquirt for my rebuild.
Thread Starter
Elite Member
iTrader: (8)
Joined: Dec 2008
Posts: 2,910
Total Cats: 51
From: Kingston, Ontario
Simplicity more than anything else. I have 2 CAS, but no cam angle sensors for '99.
That and my '99 valve cover was cracked- so I cut the front off of it.
For my goals it will work fine, keep the wiring simple, base maps will work properly and it keeps the budget in check.
That and my '99 valve cover was cracked- so I cut the front off of it.
For my goals it will work fine, keep the wiring simple, base maps will work properly and it keeps the budget in check.
Reply
0
0
Thread Starter
Elite Member
iTrader: (8)
Joined: Dec 2008
Posts: 2,910
Total Cats: 51
From: Kingston, Ontario
Im sure I will have more questions coming... but for now I will let you guys know I have the Micro! Just need to build the engine and wire it up... I have 99% of the electronics (coils being what I need).
Microsquirt v3 by Shlammed, on Flickr
Surprised at the size and weight of it. the wiring harness is almost as big as the whole ECU! There is a #2 Robertson short bit to show you the size of the ECU itself. pretty cool!
Microsquirt v3 by Shlammed, on Flickr
Surprised at the size and weight of it. the wiring harness is almost as big as the whole ECU! There is a #2 Robertson short bit to show you the size of the ECU itself. pretty cool!
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
Oct 26, 2018 11:00 PM
Johnny Tater
MSPNP
1
Sep 27, 2015 12:38 AM
