More problems. Engine flooded!
12-13-2009, 02:37 PM
#21
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Mesa, AZ
Posts: 169
Total Cats: 0
In my experience if you click burn to ecu it doesn't close the window. However you can check if the ms took it by hitting burn, changing some of the values on screen and then hit fetch.
The settings should go back to what you had programmed in.
As far as not starting, are you getting spark at all? Take one of the spark plugs out, plug it back in to the wire, set it on top of the engine with the threading touching the valve cover and crank the engine over.
You should see a spark. If you do then your timing is prob. off.
Also, does it fire at all or does it just crank only?
The settings should go back to what you had programmed in.
As far as not starting, are you getting spark at all? Take one of the spark plugs out, plug it back in to the wire, set it on top of the engine with the threading touching the valve cover and crank the engine over.
You should see a spark. If you do then your timing is prob. off.
Also, does it fire at all or does it just crank only?
Right now it only cranks no attemp to fire at all. I'm going to check the spark right now.
Reply
0
0
12-13-2009, 02:41 PM
#22
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Mesa, AZ
Posts: 169
Total Cats: 0
This car is making scary loud bump noises when I prime the fuel pump. It's like someone is jumping into the trunk.
Reply
0
0
12-13-2009, 02:59 PM
#24
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Mesa, AZ
Posts: 169
Total Cats: 0
Megatune shows no rpm when I try to start, or will the rpms show only when the car is running. Should it also show up when cranking?
I was messing with the tps I plugged it in then I unplugged it and the car cranked, sparked and I heard the fuel injectors come on for a split second. So I know all of it works at least.
I was messing with the tps I plugged it in then I unplugged it and the car cranked, sparked and I heard the fuel injectors come on for a split second. So I know all of it works at least.
Reply
0
0
12-13-2009, 03:29 PM
#25
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,189
Total Cats: 1,135
Click "Basic settings" then "engine constraints 1".
In this window, top left, type in the required fuel numbers I gave you, for either 1.6 or 1.8. And please fill in a short description of your car, year, mods, etc in your signature. Also put your location in your profile so we know where you are.
If you use "required fuel" button, use 12.7 for your air-fuel ratio, either 1600 or 1800 for your engine size, and obviously 430 for you injector size. Make sure the correct units are selected as well.
In this window, top left, type in the required fuel numbers I gave you, for either 1.6 or 1.8. And please fill in a short description of your car, year, mods, etc in your signature. Also put your location in your profile so we know where you are.
If you use "required fuel" button, use 12.7 for your air-fuel ratio, either 1600 or 1800 for your engine size, and obviously 430 for you injector size. Make sure the correct units are selected as well.
Reply
0
0
12-14-2009, 06:03 PM
#28
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Mesa, AZ
Posts: 169
Total Cats: 0
Well, any ideas? I haven't heard anything good from DIYautotune. He told me to buy or borrow a jimstim and I realy don't feel like sinking more money into this thing. Unless someone nearby happens to have a jimstim and is willing to help out. I don't think he bothered to look at this thread.
If I could just get it to read rpm I bet it would start. There's always something with this thing.
If I could just get it to read rpm I bet it would start. There's always something with this thing.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
