MS2: bog and then fix with restart
Thread Starter
Junior Member
Joined: Sep 2014
Posts: 216
Total Cats: 2
From: Portland (left coast)
MS2: bog and then fix with restart
I'm clearly missing something here. This is a Rev. build MS2 advanced for my MSM.
The car upon cold start, even once it get's a little warm, will deeply bog if anything more than say 30% throttle is applied. Simply restarting the car makes this go away and it seems to not matter how cold/warm the car is. Once the restart has taken place and the car is driven it will not be needed until the car significantly cools off. So, something in cold enrichment?
I was wondering if someone can look over this log and tell me if they see anything I can try changing rather than me just shooting in the dark without night vision.
Please also let me know if I need to do a better job logging, etc. New to this thing. The car has been dyno tuned so it has not been left to just tune itself.
The car upon cold start, even once it get's a little warm, will deeply bog if anything more than say 30% throttle is applied. Simply restarting the car makes this go away and it seems to not matter how cold/warm the car is. Once the restart has taken place and the car is driven it will not be needed until the car significantly cools off. So, something in cold enrichment?
I was wondering if someone can look over this log and tell me if they see anything I can try changing rather than me just shooting in the dark without night vision.
Please also let me know if I need to do a better job logging, etc. New to this thing. The car has been dyno tuned so it has not been left to just tune itself.
Last edited by tazswing; Aug 28, 2015 at 11:37 AM. Reason: fixing my stupid attachment issue
Reply
0
0
Thread Starter
Junior Member
Joined: Sep 2014
Posts: 216
Total Cats: 2
From: Portland (left coast)
Reply
0
0
Junior Member
Joined: Jul 2013
Posts: 319
Total Cats: -11
From: TX
That's strange, a few of us with Rev Built for MSM's seem to have issues like this. I have an issue with random high idle cold starts, along with a few members. Maybe it's an issue with MSM codes?
I get super high idle of 3K, then I do a quick off/on, and it idles normal.
I get super high idle of 3K, then I do a quick off/on, and it idles normal.
Reply
0
0
Sounds like it needs more tuning to me, if it doesn't bog immediately after you restart it ASE is probably still active and running. Bogging while cold is usually a lean condition, at least in my experience.
This log shows no restart, so I;m not sure what good it will do anyone.
This log shows no restart, so I;m not sure what good it will do anyone.
Reply
0
0
Thread Starter
Junior Member
Joined: Sep 2014
Posts: 216
Total Cats: 2
From: Portland (left coast)
Wow, ok. good to know. I will try again.
Sounds like it needs more tuning to me, if it doesn't bog immediately after you restart it ASE is probably still active and running. Bogging while cold is usually a lean condition, at least in my experience.
This log shows no restart, so I;m not sure what good it will do anyone.
This log shows no restart, so I;m not sure what good it will do anyone.
Reply
0
0
Thread Starter
Junior Member
Joined: Sep 2014
Posts: 216
Total Cats: 2
From: Portland (left coast)
Interesting since I get a lingering high idle after coming to a stop before it settles once fully warmed and restarted (to get rid of the bog).
That's strange, a few of us with Rev Built for MSM's seem to have issues like this. I have an issue with random high idle cold starts, along with a few members. Maybe it's an issue with MSM codes?
I get super high idle of 3K, then I do a quick off/on, and it idles normal.
I get super high idle of 3K, then I do a quick off/on, and it idles normal.
Reply
0
0
Thread Starter
Junior Member
Joined: Sep 2014
Posts: 216
Total Cats: 2
From: Portland (left coast)
New log coming this week. Oh, and signed up for two days at The Ridge...hopefully the clutch won't fail again...
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
