MS2: bog and then fix with restart
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Portland (left coast)
Posts: 216
Total Cats: 2
MS2: bog and then fix with restart
I'm clearly missing something here. This is a Rev. build MS2 advanced for my MSM.
The car upon cold start, even once it get's a little warm, will deeply bog if anything more than say 30% throttle is applied. Simply restarting the car makes this go away and it seems to not matter how cold/warm the car is. Once the restart has taken place and the car is driven it will not be needed until the car significantly cools off. So, something in cold enrichment?
I was wondering if someone can look over this log and tell me if they see anything I can try changing rather than me just shooting in the dark without night vision.
Please also let me know if I need to do a better job logging, etc. New to this thing. The car has been dyno tuned so it has not been left to just tune itself.
The car upon cold start, even once it get's a little warm, will deeply bog if anything more than say 30% throttle is applied. Simply restarting the car makes this go away and it seems to not matter how cold/warm the car is. Once the restart has taken place and the car is driven it will not be needed until the car significantly cools off. So, something in cold enrichment?
I was wondering if someone can look over this log and tell me if they see anything I can try changing rather than me just shooting in the dark without night vision.
Please also let me know if I need to do a better job logging, etc. New to this thing. The car has been dyno tuned so it has not been left to just tune itself.
Last edited by tazswing; 08-28-2015 at 11:37 AM. Reason: fixing my stupid attachment issue
#6
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Portland (left coast)
Posts: 216
Total Cats: 2
Wow, ok. good to know. I will try again.
Sounds like it needs more tuning to me, if it doesn't bog immediately after you restart it ASE is probably still active and running. Bogging while cold is usually a lean condition, at least in my experience.
This log shows no restart, so I;m not sure what good it will do anyone.
This log shows no restart, so I;m not sure what good it will do anyone.
#7
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Portland (left coast)
Posts: 216
Total Cats: 2
Interesting since I get a lingering high idle after coming to a stop before it settles once fully warmed and restarted (to get rid of the bog).
That's strange, a few of us with Rev Built for MSM's seem to have issues like this. I have an issue with random high idle cold starts, along with a few members. Maybe it's an issue with MSM codes?
I get super high idle of 3K, then I do a quick off/on, and it idles normal.
I get super high idle of 3K, then I do a quick off/on, and it idles normal.
#11
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Portland (left coast)
Posts: 216
Total Cats: 2
New log coming this week. Oh, and signed up for two days at The Ridge...hopefully the clutch won't fail again...
Thread
Thread Starter
Forum
Replies
Last Post