As the title says, a MS I'm trying to tune seems to be ignoring the VE table. VE1 and even VE2 both say ~47.2 even while I manipulate the table from 30 to 255. Ecu saw a number of low voltage cranks with a bad battery. Could this just be a firmware corruption issue? Or am I missing something. Tune attached. Picture below shows EGO adding 8% while VE is 47.2, despite the fuel table saying 144.

 

post log. nothing really stands out in the map

 

Good to hear I didn’t miss anything obvious. I did try to take a log, but realized it wouldn’t show my changes in VE. Won’t even let me press the burn button after changes. But I realize it may have shown other details. I’ll post one ASAP.

 

Do you have idle VE turned on? The engine state is idle in that screen shot. Changes to the main VE tables won't do anything if idle VE is active.

 

I am the lucky one that got Curly's help getting my NA8 with MK full kit on stock injectors (for now) started for the first time + some additional troubleshooting.

I just checked and idle VE settings is off (pic). also ill post the Mlg here as well. Im pretty sure this is the startup where he was changing the cells in the VE table. If not i can take another data log while doing so.