What's the predicted usefulness of the knock sensing setup in the MSPNP2?
I'd really like to add some knocksensing awsomeness when I get my 11+:1 VVT engine back into the car (I need every safety measure I can think of, I don't trust myself as a tuner/user). I still have some space in the DIYPNP box so a copy of the circuit would fit I guess. |
if you can get a schematic for it...
|
Originally Posted by Braineack
(Post 817157)
if you can get a schematic for it...
If it works, I don't have a problem with a decently priced kit. I would however prefer a kit for internal use, but a separate box would be ok too. |
What compontents need to be added to the diypnp to make it as funtional as the mspnp2 other than the more complete knock sensor?
I saw the Low imp injectors will work anything else I should consider before pulling the trigger today on a diypnp? |
without knowing what the MSPNP2 actually has, for a 90-93, nothing.
|
Originally Posted by gslender
(Post 817016)
Matt,
If you get the MS2/Extra guys to adopt my firmware mods into the base release you could perhaps wire up AC Idle Up and Clutch PID Lockout Mods to improve the OEM stability for idle too... if you send me a sample device I'd be happy to test the firmware :P G |
Originally Posted by NiklasFalk
(Post 817155)
What's the predicted usefulness of the knock sensing setup in the MSPNP2?
I'd really like to add some knocksensing awsomeness when I get my 11+:1 VVT engine back into the car (I need every safety measure I can think of, I don't trust myself as a tuner/user). |
All times are GMT -4. The time now is 11:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands