NA CAS Issues
11-10-2010, 12:42 AM
#1
mkturbo.com
Thread Starter
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,176
Total Cats: 1,680
NA CAS Issues
All of a sudden I am getting problems with reading the correct signal from my CAS. My car started Sunday and now it will not.
That is a picture of what the composite logger was picking up while trying to crank. So far I have check that I get continuity on my 2 CAS wires going from my DB37 to the Molex connector that plugs into my stock harness. I will check and make sure there is continuity between the CAS plug and the other end of my harness tomorrow. I am more interested in what I should be looking at on my actual MS board circuit wise and testing to see if I fucked something up on there.
That is a picture of what the composite logger was picking up while trying to crank. So far I have check that I get continuity on my 2 CAS wires going from my DB37 to the Molex connector that plugs into my stock harness. I will check and make sure there is continuity between the CAS plug and the other end of my harness tomorrow. I am more interested in what I should be looking at on my actual MS board circuit wise and testing to see if I fucked something up on there.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
