Ok i will beg you
#24
OK now i got the car to start and run a bit
I adjust the tune and it dose not seem to change how it runs .
It runs choppy if i step on it and runs rich I have TPS unplug
mas remove and air temp in place
TP sits at 85 or TPS
CLT 180
Air Fuel Ratio 17
Fuel Load 150 with nothing plug in
sorry i was half a sleep
I adjust the tune and it dose not seem to change how it runs .
It runs choppy if i step on it and runs rich I have TPS unplug
mas remove and air temp in place
TP sits at 85 or TPS
CLT 180
Air Fuel Ratio 17
Fuel Load 150 with nothing plug in
sorry i was half a sleep
Last edited by MiataFox; 04-26-2015 at 07:20 PM.
#32
Ok, but what does the MAP read when the car is not running? If it is 150kpa you are either at the bottom of the sea, your settings are wrong. or megasquirt is broken. MAP is 1/2 of speed density tuning, it won't work without it.
That can happen, and it doesn't necessarily mean anything is broken. If you turned your car off while auto-tuning you can get that error.
Or, your ****'s broke and not communicating to the laptop properly. If you have another usb to serial cable I'd try it.
Or, your ****'s broke and not communicating to the laptop properly. If you have another usb to serial cable I'd try it.