That's what I did do, and it was somewhere around a 7 for a 1.8. I'll start scaling it down a little bit more to help with the a/f.

 

try 6.5

 

Ok

 

For reference purposes, I'm still in the process of solving this problem. It appears to be because of something going on with the iat. The iat is stuck at 170 degrees and will no change no matter what. Wiring is fine and it will read a weird number if you unplug it so I'm thinking the easytherm files might need to be re-burned to the controller.

 

A weird number like -40? If the sensor fails internally I could see it reading full hot.