upgrading injectors
Thread Starter
Junior Member
Joined: Sep 2014
Posts: 67
Total Cats: -15
From: whats that coming over the hill?
hi everyone. currently running a ms1pnp on stock injectors which I think is 240cc injectors and looking to upgrade to 440cc.
my Required fuel is 13.2 on my stock injectors but
my question is if I fit 440cc injectors and reduce the required fuel down would the car run like normal? (ill do the calcs later) I don't fancy altering the VE tables
my Required fuel is 13.2 on my stock injectors but
my question is if I fit 440cc injectors and reduce the required fuel down would the car run like normal? (ill do the calcs later) I don't fancy altering the VE tables
Thread Starter
Junior Member
Joined: Sep 2014
Posts: 67
Total Cats: -15
From: whats that coming over the hill?
I'm turboing next month and ita getting mapped in February. I wanna be able to drive it to the rolling road to map it then. It's my daily runabout.
I just want it to be drivable for a week or so until it's properly mapped
I just want it to be drivable for a week or so until it's properly mapped
okay that makes more sense.
you'll have to half the req_fuel and your accel enrichments (or any others not in % but total PW in ms).
there might be some fine tuning required in the fuel map just due to different charateristics but for the most part it shouldn't be an issue.
you'll have to half the req_fuel and your accel enrichments (or any others not in % but total PW in ms).
there might be some fine tuning required in the fuel map just due to different charateristics but for the most part it shouldn't be an issue.
Thread
Thread Starter
Forum
Replies
Last Post







