USB = beautiful
#1
Miotta FTW!
Thread Starter
iTrader: (24)
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
USB = beautiful
Just added in the USB converter mod... love it. One less cable to think about or mess with... or forget. The cable is uses is generic for a ton of cameras... so if ever needed... much higher chance of finding one in a hurry.
Working well... only wierdness was it didn't want to work on COM16 where it ended up by default on my machine... but worked the instant it was on a lower COM... COM2 for me.
Working well... only wierdness was it didn't want to work on COM16 where it ended up by default on my machine... but worked the instant it was on a lower COM... COM2 for me.
#4
What year is your car?
If you can get in on that boomslang group buy and get the ECU connectors, i'd suggest doing it because I didn't do it myself. Definitely not necessary but cutting up the stock harness sucks and makes a big mess. If i could do it again i would spend the $30 and get the connectors.
If you can get in on that boomslang group buy and get the ECU connectors, i'd suggest doing it because I didn't do it myself. Definitely not necessary but cutting up the stock harness sucks and makes a big mess. If i could do it again i would spend the $30 and get the connectors.
#5
Miotta FTW!
Thread Starter
iTrader: (24)
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
I've got an ECU plug from boomslang already. And the 18inch Harness that DIYautotune offers. I just need the schematics for a 93 and then figure out their harness... might have to unwrap it to figure out what wires really go to where on the plug.
#6
You've seen these right? http://www.madracki.com/miata/wiring.html
I used the '99 schematic for mine and it was perfect. Just takes a little while to sort what what the wire colors are. Make up an excel document or something as you go through it all to keep track of what's what for each pinout.
I used the '99 schematic for mine and it was perfect. Just takes a little while to sort what what the wire colors are. Make up an excel document or something as you go through it all to keep track of what's what for each pinout.
#8
You've seen these right? http://www.madracki.com/miata/wiring.html
I used the '99 schematic for mine and it was perfect. Just takes a little while to sort what what the wire colors are. Make up an excel document or something as you go through it all to keep track of what's what for each pinout.
I used the '99 schematic for mine and it was perfect. Just takes a little while to sort what what the wire colors are. Make up an excel document or something as you go through it all to keep track of what's what for each pinout.
#12
You've seen these right? http://www.madracki.com/miata/wiring.html
I used the '99 schematic for mine and it was perfect. Just takes a little while to sort what what the wire colors are. Make up an excel document or something as you go through it all to keep track of what's what for each pinout.
I used the '99 schematic for mine and it was perfect. Just takes a little while to sort what what the wire colors are. Make up an excel document or something as you go through it all to keep track of what's what for each pinout.
I've been trying to sort out which wires are what on my '99, could you post which wire colors you used for what so that I can check mine?
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
FAB
Fab9 Tuning - Miata Performance Parts
0
09-11-2015 12:02 PM