Devil's own kit installed
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
Devil's own kit installed
So, i got my WI kit installed over the weekend. A buddy of mine fabbed up a very ballin' bracket to hold the pump. I also relocated the washer bottle to the firewall. I will snap a picture of the nozzle placement later today. I drilled and tapped the intercooler outlet.
#7
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,050
Total Cats: 6,608
I LOLed at the LOL hose.
I do like what you wound up doing in terms of mounting the pump. I'm thinking that since I've freed up some space over there, I might move mine up from its current location in front of the right front wheel. I've always been a tad nervous about having the water lines running through harm's way down there.
Did you relocate the fuse box?
I do like what you wound up doing in terms of mounting the pump. I'm thinking that since I've freed up some space over there, I might move mine up from its current location in front of the right front wheel. I've always been a tad nervous about having the water lines running through harm's way down there.
Did you relocate the fuse box?
#11
Senior Member
Thread Starter
iTrader: (7)
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
So, i pulled a LOT of fuel out of my map, upped the boost to 18psi and put in 28* of timing and holy ****. This car is MUCH faster. I probably picked up 40whp at least. No sign of knock. The car is scary fast now. Roll into boost and lose traction. I cant wait to go to the 1/4 mile and bust out a mid 12's pass.
#12
Elite Member
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
So, i pulled a LOT of fuel out of my map, upped the boost to 18psi and put in 28* of timing and holy ****. This car is MUCH faster. I probably picked up 40whp at least. No sign of knock. The car is scary fast now. Roll into boost and lose traction. I cant wait to go to the 1/4 mile and bust out a mid 12's pass.
I'm sold.
#14
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,050
Total Cats: 6,608
Would you mind posting the timing map that you've worked so hard to perfect? I'd like to see how much more you've been able to run than mine (which I still have not dyno-tuned.)
#16
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,050
Total Cats: 6,608
No ****? Well, I've clearly got a ways to go then. If I ever wind up being back home for long enough to get out to the dyno I found, I'll see just how far we can push this bitch. Still a bit worried just how far I want to go on the stock rods.
#20
Senior Member
Thread Starter
iTrader: (7)
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
I was running 14psi before. it peaks at 19 and steadies out at 18. Yes. It is the stock motor. 87k miles never had the head or oil pan off. I am on a quest for 400whp on the stock motor.