LC1 with XD16 Gauge
#1
#3
It's an old picture so no I don't think it needs "all" of that. But yes, the LC1 uses a separate controller with separate wiring than the gauge. So there is a fair bit of wiring. Everything required will be included of course.
#5
Nope, it is as you gave it to me. I'll change my post thanks.
#7
PM Replied. One question asked was whether the LC1 was a pain to wire. I've read mixed reviews but I've priced it what I think is fair. If wired correctly they seem to work well.
Here are some recent photos. No instructions or anything included, what you see is what you get. I never had this hooked up but it seems to be in decent shape.
Here are some recent photos. No instructions or anything included, what you see is what you get. I never had this hooked up but it seems to be in decent shape.
#9
I think some of the wiring here was tied into some shared grounds and power for other gauges which is why it looks the way it does. I'll take better pictures of the colors but the LC1 has a wideband output for standalone and a narrowband output for gauge.
From the user guide: http://www.innovatemotorsports.com/s...C-1_Manual.pdf
"6. Optionally, the YELLOW (Analog out 1) and/or BROWN (Analog out 2) can be connected to the analog inputs of other devices such as data loggers, ECUs, or gauges. If either one or both of these wires are not being used isolate and tape the wire(s) out of the way. The default analog outputs are as follows: Analog output one is 1.1V = 14 AFR and .1V = 15 AFR. This is a simulated narrowband signal. Analog output two is setup as 0V = 7.35 AFR and 5V = 22.39"
From the user guide: http://www.innovatemotorsports.com/s...C-1_Manual.pdf
"6. Optionally, the YELLOW (Analog out 1) and/or BROWN (Analog out 2) can be connected to the analog inputs of other devices such as data loggers, ECUs, or gauges. If either one or both of these wires are not being used isolate and tape the wire(s) out of the way. The default analog outputs are as follows: Analog output one is 1.1V = 14 AFR and .1V = 15 AFR. This is a simulated narrowband signal. Analog output two is setup as 0V = 7.35 AFR and 5V = 22.39"
#10
$120 shipped?
#12
I'd rather not? I don't know how much that would be, I'll check.
Things not included with this: The software CD, The "serial program cable", Innovate Motor Sports On-Line Store
Things not included with this: The software CD, The "serial program cable", Innovate Motor Sports On-Line Store
#13
$100 shipped?
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM