Cspence's MASSIVE Part Out - AEM Tuckin99 T25 Koni H&R Flyin Miata Tial
#41
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
SpenceChristopher@yahoo.com
Coolant re-route is available, (somehow I missed that on my enormous list). To get the intake to work should just require some tweaking on your tune to get it ideal....it comes with the fuel rail and throttle cable
#44
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
More stuff gone! Main list has been updated....
I appologize once again if I have missed someones email or pm. It's not intentional, I just can keep up . If I have'nt responded, please send me another message, preferably a email. Thanks!
I appologize once again if I have missed someones email or pm. It's not intentional, I just can keep up . If I have'nt responded, please send me another message, preferably a email. Thanks!
#47
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Decided it would be easier to consolidate the list....here's what I have left, damn this went fast!
LSD Rear End w/ Delrin Mounts WITH AXLES (1.8 rear with rx7 clutch packs) $500
1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) $250
Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)$250
Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) $200
Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece
Stock Guage Cluster $30
Center Console $30
Triangle Windows $25
Drop in Windows $50
Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $50
Door Panels $50
Radiator w/ fan(Custom Aluminum) 24"x19"x3" $150
Flyin Miata Sway Bar $75
Stock Rear Sway Bar $Free
1.8L Brake Setup, rotors, calipers, brackets, ebc red pads, stainless braided lines $300
1.6L Ignition Coil $50
Ignitor $20
Plug Wires $20
Smoked Stock Tail Lights $50
Sheet Metal Frame Rails w/ Hardware $75
Brake Master Cylinder and Booster $50
1.8L Drive Shaft $50 OBO
Rear Bumper $Free with a purchase of 50 or more, lol
Rear Finishing panel (No cracks) $40
Trunk Lid $20
Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something
LSD Rear End w/ Delrin Mounts WITH AXLES (1.8 rear with rx7 clutch packs) $500
1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) $250
Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)$250
Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) $200
Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece
Stock Guage Cluster $30
Center Console $30
Triangle Windows $25
Drop in Windows $50
Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $50
Door Panels $50
Radiator w/ fan(Custom Aluminum) 24"x19"x3" $150
Flyin Miata Sway Bar $75
Stock Rear Sway Bar $Free
1.8L Brake Setup, rotors, calipers, brackets, ebc red pads, stainless braided lines $300
1.6L Ignition Coil $50
Ignitor $20
Plug Wires $20
Smoked Stock Tail Lights $50
Sheet Metal Frame Rails w/ Hardware $75
Brake Master Cylinder and Booster $50
1.8L Drive Shaft $50 OBO
Rear Bumper $Free with a purchase of 50 or more, lol
Rear Finishing panel (No cracks) $40
Trunk Lid $20
Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something
#54
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
On another note, tonight was the last time I'll ever see the miata , but I had a few good laughs with these guys that spoke about 4 words of english lmao
#57
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
LSD Rear End w/ Delrin Mounts WITH AXLES (1.8 rear with rx7 clutch packs) SOLD! $500
1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) $250
Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)$250
Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) $200
Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece
Stock Guage Cluster $30
Center Console $30
Triangle Windows FREE WITH DOORS
Drop in Windows $FREE WITH DOORS
Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $FREE
Door Panels $COME WITH DOORS FOR FREE
Radiator w/ fan(Custom Aluminum) 24"x19"x3" $150
Flyin Miata Sway Bar $75
Stock Rear Sway Bar $Free
1.8L Brake Setup, rotors, calipers, brackets, ebc red pads, stainless braided lines $300
1.6L Ignition Coil $50
Ignitor $20
Plug Wires $20
Smoked Stock Tail Lights $50
Sheet Metal Frame Rails w/ Hardware $75
Brake Master Cylinder and Booster $50
1.8L Drive Shaft SOLD! $50 OBO
Rear Finishing panel (No cracks) $40
Trunk Lid $FREE - Pick it up or it goes in the trash
Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something
1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) $250
Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)$250
Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) $200
Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece
Stock Guage Cluster $30
Center Console $30
Triangle Windows FREE WITH DOORS
Drop in Windows $FREE WITH DOORS
Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $FREE
Door Panels $COME WITH DOORS FOR FREE
Radiator w/ fan(Custom Aluminum) 24"x19"x3" $150
Flyin Miata Sway Bar $75
Stock Rear Sway Bar $Free
1.8L Brake Setup, rotors, calipers, brackets, ebc red pads, stainless braided lines $300
1.6L Ignition Coil $50
Ignitor $20
Plug Wires $20
Smoked Stock Tail Lights $50
Sheet Metal Frame Rails w/ Hardware $75
Brake Master Cylinder and Booster $50
1.8L Drive Shaft SOLD! $50 OBO
Rear Finishing panel (No cracks) $40
Trunk Lid $FREE - Pick it up or it goes in the trash
Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something
Last edited by Cspence; 11-09-2011 at 07:38 PM.