FS: 460 Injectors, now with Injector pictures
05-18-2010, 12:16 PM
#1
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2009
Location: Salinas, CA
Posts: 445
Total Cats: 1
FS: 460 Injectors, now with Injector pictures
I am selling my Braineak built MS. I am going a different route on my car, smog legal all the way. 
(mainly might be selling it).
*Sold* The MS is set up with idle control, inverted spark output, and boost controller. With it you will get my used GM IAT sensor with harness, Ford throttle position sensor(pnp), never used boost solenoid, 3' 9 pin extension cable, resistor for 1.6 tach, and 1.6 pnp harness.
-*Sold* Lexus CoPs (90919-02234)with 1.6 pnp harness and aluminum hold down plate. (will include a spare capacitor) $200 obo
-Mazda 1.8l brown top injectors, one injector has a small piece broken out of the cap. It doesn't affect it, it never leaked. $40 obo
-Rebuilt (through one of my vendors) 460 red top RX-7 injectors, pnp no harnesses required. (3-4,000 miles on them) $150 obo
all prices include shipping in the lower 48.
Parts are removed from my car, boxed and ready to ship.
(mainly might be selling it).*Sold* The MS is set up with idle control, inverted spark output, and boost controller. With it you will get my used GM IAT sensor with harness, Ford throttle position sensor(pnp), never used boost solenoid, 3' 9 pin extension cable, resistor for 1.6 tach, and 1.6 pnp harness.
-*Sold* Lexus CoPs (90919-02234)with 1.6 pnp harness and aluminum hold down plate. (will include a spare capacitor) $200 obo
-Mazda 1.8l brown top injectors, one injector has a small piece broken out of the cap. It doesn't affect it, it never leaked. $40 obo
-Rebuilt (through one of my vendors) 460 red top RX-7 injectors, pnp no harnesses required. (3-4,000 miles on them) $150 obo
all prices include shipping in the lower 48.
Parts are removed from my car, boxed and ready to ship.
Last edited by Qckslvr; 05-22-2010 at 02:14 PM.
Reply
0
0
05-19-2010, 12:16 PM
#5
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2009
Location: Salinas, CA
Posts: 445
Total Cats: 1
Listed part number on CoPs, and updated my injectors. I had a brain fart when I listed them, they are 460 red tops, not 440s.
Last edited by Qckslvr; 05-21-2010 at 11:47 AM.
Reply
0
0
05-21-2010, 01:20 PM
#8
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2009
Location: Salinas, CA
Posts: 445
Total Cats: 1
replied.
and here is a link to the thread that I used to make them. For those that have questions if they will work on 1.8s and various years. Yes they will, but you will need to re-do the harness. I am not sure if the hold down plate will work on all years though. Maybe some one can chime in on that subject
https://www.miataturbo.net/useful-saved-posts-8/upgrading-coil-plugs-all-years-cop-writeup-12704/
and here is a link to the thread that I used to make them. For those that have questions if they will work on 1.8s and various years. Yes they will, but you will need to re-do the harness. I am not sure if the hold down plate will work on all years though. Maybe some one can chime in on that subject
https://www.miataturbo.net/useful-saved-posts-8/upgrading-coil-plugs-all-years-cop-writeup-12704/
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
