MS3x & AEM UEGO
Thread Starter
Elite Member
iTrader: (7)
Joined: Jan 2008
Posts: 2,750
Total Cats: 320
From: Statesville, NC
MS3x & AEM UEGO
Selling my MS3x to help buy some clubsports for my 94R. It has only been ran for around 40 miles and a handful of start-ups. Decided to go a different route with the miatas and don't need this anymore.
DIY-
"The MS3 daughter card on its own will give you all these features and more:
VE and ignition tables are now both 16 x 16
0.1% steps on VE table, 0.1 degree steps on ignition table
Socket for an onboard SD card - no laptop required for data logging (SD Card not included)
Built in USB port
GM stepper IAC control
Closed loop idle and mixture control
CANBus communications for interface with GPIO Board, IO Extender, or other devices
Staged injection
Native support for many different OEM trigger patterns
The MS3 also gives you a starting point for even more expansion. You will be able to connect the headers on this board to additional hardware, such as the MS3X board to enable features like these:
8 channels sequential fuel control
8 channel sequential ignition control
Individual fuel and spark trim for cylinder by cylinder tuning
2 and 3 channel PWM IAC control
2 stage nitrous controller
Table switching for multi-fuel engines
2 step launch control"
It does have the expansion board to do sequential fuel/ignition. I've got the 12ft harnesses to go with it, its a little cut up with some grounds wired to it, I adjusted the price to reflect that.
I've got an AEM UEGO wide-band with around 8000 miles I could sell with it.
Prices:
$850 $750 OBO shipped for MS3x, wide-band, & harnesses
$725 $675 OBO shipped for the MS3x & harnesses
$600 $550 OBO shipped for the MS3x by itself.
MS3x, wide-band, & harnesses are $993 new
MS3x & harnesses are $793 new
MS3 with the expand board is $630 new
If you have any questions feel free to PM me here.
Thanks!
DIY-
"The MS3 daughter card on its own will give you all these features and more:
VE and ignition tables are now both 16 x 16
0.1% steps on VE table, 0.1 degree steps on ignition table
Socket for an onboard SD card - no laptop required for data logging (SD Card not included)
Built in USB port
GM stepper IAC control
Closed loop idle and mixture control
CANBus communications for interface with GPIO Board, IO Extender, or other devices
Staged injection
Native support for many different OEM trigger patterns
The MS3 also gives you a starting point for even more expansion. You will be able to connect the headers on this board to additional hardware, such as the MS3X board to enable features like these:
8 channels sequential fuel control
8 channel sequential ignition control
Individual fuel and spark trim for cylinder by cylinder tuning
2 and 3 channel PWM IAC control
2 stage nitrous controller
Table switching for multi-fuel engines
2 step launch control"
It does have the expansion board to do sequential fuel/ignition. I've got the 12ft harnesses to go with it, its a little cut up with some grounds wired to it, I adjusted the price to reflect that.
I've got an AEM UEGO wide-band with around 8000 miles I could sell with it.
Prices:
MS3x, wide-band, & harnesses are $993 new
MS3x & harnesses are $793 new
MS3 with the expand board is $630 new
If you have any questions feel free to PM me here.
Thanks!
Last edited by flier129; Jul 27, 2011 at 04:19 PM.
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
Sep 30, 2018 01:09 PM
