Triple Pass Race Radiator for NA $265
07-21-2019, 06:25 PM
#1
Moderator
Thread Starter
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,664
Total Cats: 3,013
Triple Pass Race Radiator for NA $265
I will deliver this radiator to MATG. This price is a fraction of what it cost new. I can get a shipping quote if needed.
Triple pass circle track racing radiator custom modified for NA Miata fitment. Uses standard Ford/Chevy style radiator caps in whatever pressure you desire. Upper mounts are stock Miata units, lower simply uses a long bolt through the lower hole and two nuts to snugly secure. Cover bolts with some fuel or vacuum line and they will tightly nestle into the lower radiator stirrups on each side.
Worked well on track up to 300whp in conjunction with an oil cooler and proper ducting. And that's with the A/C condenser in the way.
I am only selling because the car is heading towards 400 horsepower now with the BMW transmission swap so had to go even larger. And I was not ready to give up air-conditioning or track days.
You may notice the offset of the mounting to the passenger side. That was originally to allow for an oil cooler to be placed in that area with venting windows in the plate. That never came to fruition because I elected to locate cooler inside the front bumper support.
Unit comes with big radiator box to protect it.
Water bottle in pictures is to demonstrate relative size.
Triple pass circle track racing radiator custom modified for NA Miata fitment. Uses standard Ford/Chevy style radiator caps in whatever pressure you desire. Upper mounts are stock Miata units, lower simply uses a long bolt through the lower hole and two nuts to snugly secure. Cover bolts with some fuel or vacuum line and they will tightly nestle into the lower radiator stirrups on each side.
Worked well on track up to 300whp in conjunction with an oil cooler and proper ducting. And that's with the A/C condenser in the way.
I am only selling because the car is heading towards 400 horsepower now with the BMW transmission swap so had to go even larger. And I was not ready to give up air-conditioning or track days.
You may notice the offset of the mounting to the passenger side. That was originally to allow for an oil cooler to be placed in that area with venting windows in the plate. That never came to fruition because I elected to locate cooler inside the front bumper support.
Unit comes with big radiator box to protect it.
Water bottle in pictures is to demonstrate relative size.
Last edited by sixshooter; 07-24-2019 at 07:03 AM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
