Turbo 1.8 part out
#1
Turbo NA 1.8 part out
Moving onto a new setup thus all my turbo stuff is for sale. Prices do not reflect shipping however it is available on the buyers dime. Engine and parts are still in my car but will be pulled within a week. Pictures will be available as i break everything down.
Everything is located at 11933
99 bp4w head never installed post refresh. less than .0010 shaved, valve job, new valve stem seals, shimmed to factory spec- $800
Kraken cast manifold(1.8 w/ m10 studs) downpipe, 3"exhaust. downpipe is the first generation version and as a result needed clearancing on the steering shaft. It rattled until i fixed it and one weld cracked and was rewelded. Not beautiful but it works great with no leaks or rattles now. $850
t25 "2860" ebay turbo with 4an 1.5mm restrictor with mishimoto sandwich plate with 4an feed line and water and oil drain lines w/ a new 3/8th NPT barb fitting for your pan - $225
Intercooler & piping (w/ GM IAT sensor) - $250
Hawley performance coolant reroute(with hose)- $100
flow force 640cc injectors w/ spacers- $250
FM stage 2 clutch w/ flywheel and throw out bearing (about 20k miles, no issues, both bearings less than 1000 miles)- 200
Everything is located at 11933
99 bp4w head never installed post refresh. less than .0010 shaved, valve job, new valve stem seals, shimmed to factory spec- $800
Kraken cast manifold(1.8 w/ m10 studs) downpipe, 3"exhaust. downpipe is the first generation version and as a result needed clearancing on the steering shaft. It rattled until i fixed it and one weld cracked and was rewelded. Not beautiful but it works great with no leaks or rattles now. $850
t25 "2860" ebay turbo with 4an 1.5mm restrictor with mishimoto sandwich plate with 4an feed line and water and oil drain lines w/ a new 3/8th NPT barb fitting for your pan - $225
Intercooler & piping (w/ GM IAT sensor) - $250
Hawley performance coolant reroute(with hose)- $100
flow force 640cc injectors w/ spacers- $250
FM stage 2 clutch w/ flywheel and throw out bearing (about 20k miles, no issues, both bearings less than 1000 miles)- 200
Last edited by irollgen4s; 09-23-2020 at 08:24 AM.
Thread
Thread Starter
Forum
Replies
Last Post
dantrapp
DIY Turbo Discussion
56
09-21-2019 04:49 PM
x_25
DIY Turbo Discussion
44
01-18-2019 12:25 PM
ADAN100
Miata parts for sale/trade
27
08-21-2018 05:54 PM