Used for a year, about 9000 miles. Checked out by Competition Clutch (the manufacturer) and deemed completely operable. It has a lot of life left to it, but my car overpowered it on the dyno.
It'll hold at least 375wtq.


Just resurface the flywheel, replace the pilot and throw out bearings and enjoy. Easily one of the best street clutches I've had on a miata.

This comes with a 10.2lb flywheel.


Brand new is $700 +ship from FM








SOLD

 

price?

 

Updated! Sorry about that

 

Would you sell just the clutch and pressure plate?

 

Pending locally for asking price. There has been some interest and haggling to try to split these. Trying to go for the easiest option to net some returns after having lost a lot trying to assess and run this, including sending it back to have it check out fine.

 

At what power did it start slipping?

 

How much are you making?

 

Currently 0. But I have a lvl 1 before I found bananas in my motor. I was just curious to compare if/when mine would start slipping when motor is done.

 

If you plan on making under 375-406FtLb torque to the wheel. This clutch is for you. Interested?

 

You had an offer

 

what power level does it start slipping?

#ALLOFIT on a built e85 6758 EFR and yes I really mean ALLOFIT. 100% WGDC

 

So I was thinking..... What happens if I move the boost reference for the EBC post intercooler. Will that sort out that taper?

BTW, my intercooler comes back tomorrow, 2.5" inlet/outlet so I'll be sending a log in the spring to see if there's a difference. I also want to see if anything changes if the clutch was indeed slipping a bit during tune, but was only apparent on the dyno..... Which means a slipping clutch was saving me from myself.

 

Where is your map sensor referenced? Because unless you have a 2port wga, moving the line to the ebc won't do much.

and IIRC you're still on open loop boost control, so the taper was a flow restriction not boost controller restriction

 

Used clutch for sale locally




It's just stock efr location direct on housing.

 

Sold.



Will be selling a brand new FM2 if anyone is interested