Firmware for 99NB MSLabs MS2 Enhanced

Thread Tools

Search this Thread

Jul 11, 2018 | 05:05 AM

phil21191

Thread Starter

Junior Member

Joined: Oct 2016

Posts: 86

Total Cats: 12

Firmware for 99NB MSLabs MS2 Enhanced

Do I need a specific version 3.4.2 firmware to reflash the above as the firmware is corrupt (V6 printed on the main PCB)

Or can I use the one here http://www.msextra.com/downloads/

I assume a flash as a Microsquirt module? Any other steps I need to take other than jumping the bootloader pins and disconnecting the coils?

Jul 11, 2018 | 06:50 AM

DNMakinson

Elite Member

iTrader: (3)

Joined: Jan 2013

Posts: 5,030

Total Cats: 861

From: Seneca, SC

I think it depends on the vintage. Calling @Reverant for you.

Jul 11, 2018 | 12:14 PM

Reverant

Elite Member

iTrader: (10)

Joined: Jun 2006

Posts: 6,020

Total Cats: 369

From: Athens, Greece

Please email with your ECU's serial number.

Aug 20, 2018 | 04:07 AM

phil21191

Thread Starter

Junior Member

Joined: Oct 2016

Posts: 86

Total Cats: 12

Quote:

Originally Posted by Reverant

Please email with your ECU's serial number.

Sorry to bug you again, Pin 17 on the DB37 which is listed as Spare Analogue Input, is this SPAREADC or SPAREADC2? If not are either of those two pins useable from the DB37?

Aug 20, 2018 | 07:05 AM

Reverant

Elite Member

iTrader: (10)

Joined: Jun 2006

Posts: 6,020

Total Cats: 369

From: Athens, Greece

Pin 16 is SPAREADC, pin 17 is SPAREADC2.

Aug 21, 2018 | 04:45 AM

DNMakinson

Elite Member

iTrader: (3)

Joined: Jan 2013

Posts: 5,030

Total Cats: 861

From: Seneca, SC

Quote:

Originally Posted by Reverant

For support on MS Labs ECUs: Please email, be sure to include the unit's serial number and include a datalog and your current map.
Please don't PM for support issues.

OK. Will try to remember in the future.