Idle/vacuum problem
#1
Idle/vacuum problem
Hi,
I have a problem with MAP-sensor/vacuum. My engine runs perfect until I connect the vacuum hose to the ecu. Anyone had a similar problem and knows what I have to change or adjust?
I attached a log file. First the engine is running without the vacuum hose connected, then connected and I also tried to disconnect the idle control valve. I can't read the log files and I'm grateful for any help.
Thanks
I have a problem with MAP-sensor/vacuum. My engine runs perfect until I connect the vacuum hose to the ecu. Anyone had a similar problem and knows what I have to change or adjust?
I attached a log file. First the engine is running without the vacuum hose connected, then connected and I also tried to disconnect the idle control valve. I can't read the log files and I'm grateful for any help.
Thanks
#4
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 857
Introduce yourself (there is a meet and greet section)
Tell us about your car, your goals, and where you live
Install a WBO2 sensor
Read the manual
Search for the most basic of information on installing a MS
As it is, you have conveyed this:
Hi, audience of 100 people (who does not know me from Adam), I bought this thing, plugged it into some car, didn't read anything about how to use it, now it doesn't seem to work correctly.
If I set it up entirely wrong, the engine runs great, meaning that it idles at 1600 RPM.
Here is a tiny bit of information, that I haven't looked at (or don't know how to read). Please look at it and tell me what to do.
Look at things from our side. You look like a bottomless pit of information suck.
Tell us about your car, your goals, and where you live
Install a WBO2 sensor
Read the manual
Search for the most basic of information on installing a MS
As it is, you have conveyed this:
Hi, audience of 100 people (who does not know me from Adam), I bought this thing, plugged it into some car, didn't read anything about how to use it, now it doesn't seem to work correctly.
If I set it up entirely wrong, the engine runs great, meaning that it idles at 1600 RPM.
Here is a tiny bit of information, that I haven't looked at (or don't know how to read). Please look at it and tell me what to do.
Look at things from our side. You look like a bottomless pit of information suck.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM