cx racing down pipe
#1
cx racing down pipe
Are the cx racing down pipes any use?
http://www.cxracing.com/mm5/merchant...gory_Code=DPMA
Anyone using them?
I want to upgrade my greddy pipe, the begi one seems quite pricey especially as i have to ship to ireland.
http://www.cxracing.com/mm5/merchant...gory_Code=DPMA
Anyone using them?
I want to upgrade my greddy pipe, the begi one seems quite pricey especially as i have to ship to ireland.
#2
Elite Member
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
probably not since its designed to work with this manifold
http://www.cxracing.com/mm5/merchant...ry_Code=MFMAZD
http://www.cxracing.com/mm5/merchant...ry_Code=MFMAZD
#5
Looks like the Megan Racing mani and DP I had when I got my car. I upgraded to a cast t3 manifold so I cut off the flange on the dp and welded a 90 and v-band to it
100_0343.jpg
100_0345.jpg
100_0343.jpg
100_0345.jpg
#6
thought as much, just wanted to check.
For me postage is the killer and the euro dollar exchange rate is not great either.
With postage and possible tax at 21% it makes the begi DP very expensive.
Guess i may be living with my asthmatic greddy DP for a while longer.
Found this one in the UK, but it looks a bit home made and has no flexi pipe.
http://www.xs-speed.co.uk/downpipe.php
For me postage is the killer and the euro dollar exchange rate is not great either.
With postage and possible tax at 21% it makes the begi DP very expensive.
Guess i may be living with my asthmatic greddy DP for a while longer.
Found this one in the UK, but it looks a bit home made and has no flexi pipe.
http://www.xs-speed.co.uk/downpipe.php
#9
Are the cx racing down pipes any use?
http://www.cxracing.com/mm5/merchant...gory_Code=DPMA
Anyone using them?
I want to upgrade my greddy pipe, the begi one seems quite pricey especially as i have to ship to ireland.
http://www.cxracing.com/mm5/merchant...gory_Code=DPMA
Anyone using them?
I want to upgrade my greddy pipe, the begi one seems quite pricey especially as i have to ship to ireland.
#10
Thanks all, the artech DP seems like much better value than the begi, think i'll start looking into it next week.
Couldn't be bothered trying to modify the cx racing one only to wonder when the welds will crack.
Here is my build so far, thanks to joe perez for the IC write up, helped a lot.
Still on a band aid setup with bipes, 265cc injectors, 2.5" stainless 2.5" d'cat pipe and o2 clamp, next step is DP, MSPNP, WBO2 and 1.8 diff conversion.
ger
Couldn't be bothered trying to modify the cx racing one only to wonder when the welds will crack.
Here is my build so far, thanks to joe perez for the IC write up, helped a lot.
Still on a band aid setup with bipes, 265cc injectors, 2.5" stainless 2.5" d'cat pipe and o2 clamp, next step is DP, MSPNP, WBO2 and 1.8 diff conversion.
ger
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM