CX Racing Turbo Kit
#21
I disagree with you fully Erat. This place used to give noobs a hard time, now it's just a flame fest everywhere, CX racing would get raped out the door. People here have forgotten that companies exist to make parts and get paid. Regularly people point at cars that I have had a hand in building and say 'hurr durr why didn;t you buy these parts and do it this way'. Well basically because I have to be able to sell that stuff and this isn't out of the goodness of my heart.
Same for these companies and they will just get shouted down.
MT has an unrealistically high expectation of what companies should supply for what prices and how they should act and somehow still pay their bills.
Dann
Same for these companies and they will just get shouted down.
MT has an unrealistically high expectation of what companies should supply for what prices and how they should act and somehow still pay their bills.
Dann
#22
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
I disagree with you fully Erat. This place used to give noobs a hard time, now it's just a flame fest everywhere, CX racing would get raped out the door. People here have forgotten that companies exist to make parts and get paid. Regularly people point at cars that I have had a hand in building and say 'hurr durr why didn;t you buy these parts and do it this way'. Well basically because I have to be able to sell that stuff and this isn't out of the goodness of my heart.
Same for these companies and they will just get shouted down.
MT has an unrealistically high expectation of what companies should supply for what prices and how they should act and somehow still pay their bills.
Dann
Same for these companies and they will just get shouted down.
MT has an unrealistically high expectation of what companies should supply for what prices and how they should act and somehow still pay their bills.
Dann
We'll never know, because they never will ask.
I'm willing to be proven wrong. Sure this site is full of a bunch of childish little babies(at times), but i feel if someone with some actual intelligence comes here with advice it won't be bad. They also have to be able to see through the bullshit. You don't see FM, or BEGi, or any other vendor getting all pissy when someone badmouths their product. They learn from it and develop something better. I haven't been here very long, but i know that the turbo Miata community has come a long way and it's not from pissing vendors off out the door.
Though. If making a bullshit shitty part keeps the lights on, then more power to them. Who are we to judge. We know their manifolds suck, so no loss for us. Again, a lot of users on this site use their products with the exception of a manifold or downpipe... Just sayin'.
#23
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,953
Total Cats: 1,007
I like how they enjoy touting the fact that the turbo provided with the kit is capable of 350 hp.
nb4 "i used the cx racing kit with bandaids and tried to max out the turbo, my rods look like spagettin noodles now, miatas suck my civic could do over 9000 with stock internals and a ti-86 for a computer."
edit: I have a cxracing radiator and intercooler. CXRacing's problem is they seem to do actual R&D one some of their parts. But everything I am looking at on their ebay store and website, all the miata parts look exactly like very other chinese aluminum foil pice out there.
nb4 "i used the cx racing kit with bandaids and tried to max out the turbo, my rods look like spagettin noodles now, miatas suck my civic could do over 9000 with stock internals and a ti-86 for a computer."
edit: I have a cxracing radiator and intercooler. CXRacing's problem is they seem to do actual R&D one some of their parts. But everything I am looking at on their ebay store and website, all the miata parts look exactly like very other chinese aluminum foil pice out there.
Anyway, I totally agree with Erat on this one, on all counts. I think if someone from their company who properly speaks English were to show up and be a reasonable human being, it could be a productive thread.
#24
It makes me wonder is why a company like this couldn't come to a forum like this and be like:
"hey MT, we're CX racing, we make turbo kits(and other assorted bullshit), and try to do it on the cheap. What we want to know is, what could we do to better our kits so that you would buy them"
Am i missing something in this logic? Perhaps they wouldn't like what we would tell them. If they could produce a manifold / downpipe cheaper than the competition, but just as strong. Well... That's what free market is all about right?
"hey MT, we're CX racing, we make turbo kits(and other assorted bullshit), and try to do it on the cheap. What we want to know is, what could we do to better our kits so that you would buy them"
Am i missing something in this logic? Perhaps they wouldn't like what we would tell them. If they could produce a manifold / downpipe cheaper than the competition, but just as strong. Well... That's what free market is all about right?
Ahem https://www.miataturbo.net/prefabbed...bo-kits-19358/
And reread what i posted here.
People don't buy certain products they make for a reason. They also DO buy some products they make for a reason... So you're whole point is moot.
And reread what i posted here.
People don't buy certain products they make for a reason. They also DO buy some products they make for a reason... So you're whole point is moot.
Why would they come and ask for improvements? Again, Because they know better. Everything you are re-posting is re-re-iterating what is already obvious 9 times over. Nobody cares. Buy it, don't buy it... [/'Moot' point #1]
The same EMUSA of which one of their tech/development people told me point blank to my face that they were going to buy an FM2 kit to copy? Those guys don't do a goddamn thing but copy **** with the cheapest materials they can find.
CXRacing is no better, and i've had some pretty shitty customer service issues with them. (Used to buy all my intercooler piping, couplers, and clamps from them.)
CXRacing is no better, and i've had some pretty shitty customer service issues with them. (Used to buy all my intercooler piping, couplers, and clamps from them.)
I personally don't care about copies of copies of copies and no R&D. That's not what I'm talking about. I could care less. There's nothing wrong with it. were talking about pipes and hardware, not someones software. It's a stupid argument which leads to the same thing. Emulation. We all know you get what you pay for out here for the most part. Not my point.
I'm simply pointing out the fact that so many people jump down peoples throat that haven't bothered to test their stuff personally before yapping their trap and condemning people. Classic forum antics since before car forums... Nobody really respects that bandwagon ****. There are real tests done by people and then they posted their facts. EMUSA is ****, but their are articles explaining their downfalls, and an in depth look at their wastegates and success with them. All that ebay **** is like that though (casting, they don't test, quality control, etc).
Again, nobody is defending anybody - in fact I'm generally in agreement. I have had my fair share of failures due to cheap stuff, but when I have I've posted my PERSONAL experience. Not someone elses, or what someone else said. The simple facts are, generally the people that get away with using cheap stuff don't post about full/partial successes because they are either afraid of the backlash, or they know it's not worth the banter so they keep to themselves and don't share... which is the reversal definition of the epitome of a car forum. The only people that will ever get praised for using cheap stuff and succeeded are high exalted members.
[/'Moot' point #2]
#25
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
You're talking in circles and i still think you failed to either read and or understand what i'm saying. I thought i was pretty clear in my posts, but i guess not.
So just stop.
So just stop.
#28
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
lol that looks fun to weld ^
No he's making stupid assumptions. I even said we don't know, we have no idea.
I also agreed about if what they do pays the bills and keeps the lights on, more power to them.
I'm also already calling out **** talkers before they would have a chance to talk crap. We KNOW what sucks. BUT we use ebay parts because we KNOW they work.
Assumptions are not spot on.
No he's making stupid assumptions. I even said we don't know, we have no idea.
I also agreed about if what they do pays the bills and keeps the lights on, more power to them.
I'm also already calling out **** talkers before they would have a chance to talk crap. We KNOW what sucks. BUT we use ebay parts because we KNOW they work.
Assumptions are not spot on.
#29
Elite Member
Thread Starter
iTrader: (1)
Join Date: Jun 2012
Location: NH
Posts: 9,479
Total Cats: 104
cant tell if 16ga or sch10. But ridiculous bundle of snakes is ridiculous.
They' obviously be cutting those tacks to the flanges and making fixtures for each tube to weld all the tubes individually then welding them to the collector and flange.
They' obviously be cutting those tacks to the flanges and making fixtures for each tube to weld all the tubes individually then welding them to the collector and flange.
#36
I have a close friend running their sch10 top mount setup on his ka24de motor, making over 400whp for 4 months now no problem. I know thats not long enough to say its good, but thats a whole lot longer then their regular crap manifolds will last with that abuse. If they made a ramhorn style bottom mount manifold for a 1.6 i would purchase it happily at the same price as their ka24de ramhorn.
#37
Elite Member
Thread Starter
iTrader: (1)
Join Date: Jun 2012
Location: NH
Posts: 9,479
Total Cats: 104