Greddy Turbo to DP gasket - yes again!
#29
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: San Jose
Posts: 213
Total Cats: 0
I think these are it. You might want to double check the bolt holes just to be sure.
http://cgi.ebay.com/ebaymotors/Turbo...spagenameZWD1V
P.S. If you wanted more info you should have PM me so I would get an email notification and replied sooner.
http://cgi.ebay.com/ebaymotors/Turbo...spagenameZWD1V
P.S. If you wanted more info you should have PM me so I would get an email notification and replied sooner.
#31
I popped off the turbo's heatshield yesterday.. so.. what would a blowing gasket look like? The turbo had some white staining along the gasket line.. I was expecting a black sooty look from a blowing gasket tho.. ?
Can post pics if need be.
Also, it seems the ring clamp around both halves of the turbo may be leaking some soot.. is this easy to remove + fix?
Thanks,
Steve
Can post pics if need be.
Also, it seems the ring clamp around both halves of the turbo may be leaking some soot.. is this easy to remove + fix?
Thanks,
Steve