I want a Complete turbo kit for $800 or less
You know your on miataturbo.net when the tags for the post are as followed 
aids + blow = turbokit, black dicks + thai women, blow + gays = aids, devin mac notices tags, newb gang banged, the double stuff

aids + blow = turbokit, black dicks + thai women, blow + gays = aids, devin mac notices tags, newb gang banged, the double stuff
Ok dipshit, dont say i never did anything for you, your wish is granted..........Asshat.
http://www.miata.net/cgi-bin/isc/cla...revaction=show
http://www.miata.net/cgi-bin/isc/cla...revaction=show
I see that this guy is likely already hidden away in a closet with the lights off crying to himself holding himself shaking back and fourth, but here's an idea!
Go find yourself a Mazdaspeed miata turbo exhaust manifold/turbo for real cheap with the outlet. get an exhaust shop to do a down pipe for like 200 ish, and ebay intake kit.
Ok, now your ready to blow your motor, go find an afpr and some bandaids until you can afford a DIY ms. The manifold/turbo's come up because all of us seem to be going FMII right now, so gl. You can't have mine, though. Needs for research.
Go find yourself a Mazdaspeed miata turbo exhaust manifold/turbo for real cheap with the outlet. get an exhaust shop to do a down pipe for like 200 ish, and ebay intake kit.
Ok, now your ready to blow your motor, go find an afpr and some bandaids until you can afford a DIY ms. The manifold/turbo's come up because all of us seem to be going FMII right now, so gl. You can't have mine, though. Needs for research.
My budget was $2500 and that was a hard goal to hit, but that was including $400 for a valve job and a diy ring and hone of the bottom end beforehand.
My emb was used for $160 but I had to spend close to $80 on new harnesses, another $60 on the support tool and cable, then $190 for the LC1 wideband.
I don't see it happening for $800 unless someone is desperate for cash. $2k is a doable amount though, keep saving!!
My emb was used for $160 but I had to spend close to $80 on new harnesses, another $60 on the support tool and cable, then $190 for the LC1 wideband.
I don't see it happening for $800 unless someone is desperate for cash. $2k is a doable amount though, keep saving!!
not even close. I'm the nice guy that will tell you how hard you're failing before the real ******** skullfuck you with their 10 foot dicks and **** on your burning ashes.
You come in here, don't research jack ****, don't know jack ****, don't make any effort to learn. Make a faggit *** thread stating an insanely low budget, your lack of skills to pull it off on such an insanely low budget, blatantly disregard what this site stands for and want us to lick your anus clean while we blow you?
I suggest you start over.
Make an intro thread.
We don't spoon feed.
Fail less
You come in here, don't research jack ****, don't know jack ****, don't make any effort to learn. Make a faggit *** thread stating an insanely low budget, your lack of skills to pull it off on such an insanely low budget, blatantly disregard what this site stands for and want us to lick your anus clean while we blow you?
I suggest you start over.
Make an intro thread.
We don't spoon feed.
Fail less
Late night boredom helps me find all kinds of old **** I missed.
QUOTE=Egotripster;584303]If I spend anymore I risk losing a testi in my sleep... bobbit style...[/QUOTE]
Tell that bitch to be cool, then use her half of the rent money to buy a decent kit.
Tell that bitch to be cool, then use her half of the rent money to buy a decent kit.
Do it right way or dont do it at all!!takes more time,money if you turbo your car even u buy a bolt on like ebay or g-ready hehe, it doest stop there youll keep adding and adding,changing,upgrading just buy a good kit plan it,what your hp goal,where u using it,mostt of mt member been there and most of them know what works and whats not.saved money plan it right.youll thank mt memeber later,guarantee.
dont have tools , well u got gasoline & match ,mind as well save the headache, stay n/a youll enjoy it more.buy one by one start with basic tools they have it in sears for under $200,youll save in long run by keep goin to a shop.honestly do re search,if u planning to keep your miata u need mt.net too,so be nice to the member dont **** them off,treat them like your teacher trust me they know what they talkin about ( for most of them).be polite,dont ask hit n run question,ask like u talkin to your buddy,save u time later ,good luck.been there done that.
Do it right way or dont do it at all!!takes more time,money if you turbo your car even u buy a bolt on like ebay or g-ready hehe, it doest stop there youll keep adding and adding,changing,upgrading just buy a good kit plan it,what your hp goal,where u using it,mostt of mt member been there and most of them know what works and whats not.saved money plan it right.youll thank mt memeber later,guarantee.
Dang. I just joined this forum. Read the first ten posts on this forum and want to never come back to this site. Wtf is wrong with yall talking **** to someone that just asked a question? Your not that important that you gotta talk some Ish just cause he's taking a second of your time. This goes to buffon. Joe Perez dusty and 18psi. Yall are like some **** bag nco's in the army. Get off your fuckinggpower trips.. And yall should be banned for breaking the rules you agreed to befire joining this forum. No vulgar or offending statements. But hey if the admins are just like **** bag nco's. If you sick there dicks they've got your back.
Half are ******* followers and the other are ******* ******. This has to be the worst community I've ever seen.. Aren't yall miata people supposed to be gay and marry? Makes me not want to get a miata and stick with my 400awhp ms6
But I'm sorry that's not to say there are good people on here. It just seems like the army here. All dbags and followers and a very few good ones. I love the army and hate the people in it. Just like this forum
And the Ban Hammer In 5...4...3...2..
POW!Bitch!
Man,you are really thick.If you are ever going to have that quick Miata...you are now going to have to buy it.I, myself ,wont even help some one like you.
(G)
Man,you are really thick.If you are ever going to have that quick Miata...you are now going to have to buy it.I, myself ,wont even help some one like you.
(G)
Last edited by Reverend Greg; Aug 6, 2010 at 11:21 PM. Reason: add pic.
not even close. I'm the nice guy that will tell you how hard you're failing before the real ******** skullfuck you with their 10 foot dicks and **** on your burning ashes.
You come in here, don't research jack ****, don't know jack ****, don't make any effort to learn. Make a faggit *** thread stating an insanely low budget, your lack of skills to pull it off on such an insanely low budget, blatantly disregard what this site stands for and want us to lick your anus clean while we blow you?
I suggest you start over.
Make an intro thread.
We don't spoon feed.
Fail less
You come in here, don't research jack ****, don't know jack ****, don't make any effort to learn. Make a faggit *** thread stating an insanely low budget, your lack of skills to pull it off on such an insanely low budget, blatantly disregard what this site stands for and want us to lick your anus clean while we blow you?
I suggest you start over.
Make an intro thread.
We don't spoon feed.
Fail less
Dang. I just joined this forum. Read the first ten posts on this forum and want to never come back to this site. Wtf is wrong with yall talking **** to someone that just asked a question? Your not that important that you gotta talk some Ish just cause he's taking a second of your time. This goes to buffon. Joe Perez dusty and 18psi. Yall are like some **** bag nco's in the army. Get off your fuckinggpower trips.. And yall should be banned for breaking the rules you agreed to befire joining this forum. No vulgar or offending statements. But hey if the admins are just like **** bag nco's. If you sick there dicks they've got your back.
Then don't come back.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote





so dont expect me to have the skill/tools to do any fabricating... im looking strickly bolt on.