Geddy is installed
#1
Geddy is installed
I got the greddy installed today, now just have to try to find all of the leaks. It seems like it is extremely laggy. I will try it again later tommorrow. I have the ISC that is bad and waiting for parts to come in, so that may be part of the problem, but I will wait and see. I will keep you guys updated. The highest boost that I saw was 3psi on my autometer gage. Can't wait to get the emanage fully tuned and be ready to kick it into high gear.
#7
Yeah, I need to go get some new hose clamps. Broke a few of them. Also I tightened down the wastegate arm. The computer threw code 34 still, just windering if you guys think that the ISC system can cause a slight hesitation at the lower rpms when I floor it. The emanage is being a bastard still. I think I will write greddy and see what they say the reason could be for both lights being on at once. Took olderguy's advice, and took the switches to 0, and the lights are both still on. Only the active light is supposed to be on when the laptop is not hooked up. Thanks for all the support guys, once I get all of the little things taken care of, I feel more power is on its way.
#10
I had the dreaded 3psi when I got my Greddy on too. I looked for a leak for a couple months before I added a check valve on the line going to the charcoal canister. And I would recammend some tbolt clamps cause I have a real bad problem with breaking the cheap clamps too.
#17
This seems to be a pretty common problem, we should try to get an article written and archived after we get that pic. 3psi for a lot of people hmmm. I will try to get mine in tommorrow, and then I will reply back about the results. Also, has anyone ever used those ebay turbo rebuild kits. I want to find an extra turbo, rebuild it, and have an extra turbo around.
Last edited by boostinsteve; 10-25-2006 at 02:10 AM.
#20
https://www.miataturbo.net/forums/sh...heck+valve+pic
Here's a old thread with another pic of the valve. I think down about half way.
Here's a old thread with another pic of the valve. I think down about half way.